Explosion protected thermostat
August 2014
Sensors & Transducers
The new Jumo exTherm-AT surface mount thermostat can be used in all environments with a potentially explosive atmosphere where temperature control and monitoring are required. Application examples include the areas surrounding pipe tracing systems where the primary concern is for monitoring the maximum pipe temperature and for distillation plants where thermal processes are controlled. It can also be used in the production of food and pharmaceutical products.
The thermostat is robust with an approved operating temperature as low as -55°C and offers flexibility with a wide range of options for equipment and combinations.
The device’s ATEX approval applies to Zones 1 and 2 (potentially explosive gas atmosphere) or to Zones 21 and 22 (potentially explosive dust atmosphere). Zone separation between Zones 0 and 1 is possible with special thermowells available in different insertion lengths.
As standard, the pressure resistant thermostat is mounted in an IP65 case made of polyester and is also available in aluminium or stainless steel.
Whether the requirement is for use as a single or double thermostat, a version that has a rigid shaft with the sleeves permanently connected to the device, or a type with a capillary up to 5000 mm in length, there is a design option available to suit the application.
The maximum approved ambient temperatures when in use are +40°C in class T6 and +70°C in class T4. The device allows a switching capacity of 25 A at 230 V.
Tested with 250 000 switching cycles the Jumo ex-Therm-AT offers many years of reliable service.
For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 (0)11 708 9200, info@asstech.co.za, www.asstech.co.za
Further reading:
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
Distance sensor for confined spaces
ifm - South Africa
Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.
Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...
Inclination sensors for motion control
ifm - South Africa
Sensors & Transducers Motion Control & Drives
The JBC dynamic inclination sensor from ifm offers accurate angle measurement in the most demanding conditions, filtering out motion disturbances such as vibrations, shocks and vehicle dynamics to deliver reliable inclination values via IO-Link or programmable switch outputs.
Read more...
printer friendly version