The new WirelessHART Fieldgate SWG70 from Endress+Hauser allows a photographic view of the topology of a wireless network as well as the display of network statistics that help simplify installation, commissioning and diagnostic tasks.
In addition, the latest firmware displays all process values and statuses on a single page. The information can be viewed with a Web browser or by using FieldCare and DTMs. In the network overview, the communication paths between the devices are shown as lines. The colour and thickness of the lines show the quality of the connection and the traffic on the paths respectively. An integrated table – the network statistics – gives detailed information on the reliability of the connections and the average time for the transmission of a data packet over the network.
The information that is available in the overview greatly simplifies and shortens the installation and commissioning of a wireless network. During operation of the plant, any disturbance of the connection is easily recognised and thus more quickly remedied.
Introduction to Part 2 loop signatures and process transfer functions
Fieldbus & Industrial Networking
The previous series of loop signature articles dealt with the basics of control loop optimisation, and concentrated on troubleshooting and ‘SWAG’ tuning of simple processes. In this new series, consideration will be given to dealing practically with more difficult issues like interactive processes, and with processes with much more complex dynamics.
Read more...Siemens sets new standards in drive technology
Fieldbus & Industrial Networking
Siemens is setting new standards in industrial drive technology with the launch of its new high-performance drive system, Sinamics S220. This offers a seamless and innovative drive system with comprehensive simulation and analysis capabilities and advanced connectivity features that enable full integration into digital work processes.
Read more...PC-based control in the plastics industry Beckhoff Automation
Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.
Read more...Cleaning solutions for optical sensors Endress+Hauser South Africa
Sensors & Transducers
Achieving accurate and continuous process visibility requires reliable sensor performance, even in challenging media. Endress+Hauser’s CYR51 mechanical cleaning unit addresses these challenges by providing stable, automated cleaning of turbidity and UV-Vis absorption sensors.
Read more...Loop Signature 31: Non-linearity in control loops (Part 2) Michael Brown Control Engineering
Fieldbus & Industrial Networking
This article is a continuation of Loop Signature 30 published in the last issue in this series, exploring reasons for non-linearities which may be encountered in feedback control loops
Read more...PC-based control optimises robotic parts handling on plastics machinery Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
NEO is a cartesian robot developed by INAUTOM Robótica in Portugal for parts removal on plastics machinery. Its aim is to increase system productivity. NAUTOM Robótica has entered into a strategic partnership with Bresimar Automação to increase the working speed of the cartesian robots using advanced control and motion solutions from Beckhoff. The result is a comprehensive, future-proof automation solution for its entire family of cartesian robots.
Read more...PC-based control for flat wire motors for electric vehicles Beckhoff Automation
Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.
Read more...PC-based control technology in additive manufacturing Beckhoff Automation
Editor's Choice Fieldbus & Industrial Networking
As an open control platform, PC-based control supports different engineering approaches, including low-code programming. The machine builder, Additive Industries uses this to create the code for the TwinCAT runtime of its 3D printers.
Read more...Cutting-edge sensor technology Endress+Hauser South Africa
Sensors & Transducers
The advantage of Endress+Hauser’s Memosens technology is that digitised measured values and sensor information are transmitted via a non-contact connection from the sensor to the cable, and as a digital signal to the transmitter.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version