Monitran has launched six new ranges of general purpose industrial sensors for vibration analysis. High accuracy, quick recovery from shock loading and high immunity from electrical noise make these new sensors suitable for a variety of applications. The units are supplied as top or side-entry and with integral cables and connectors. Submersible and intrinsically safe versions are also available.
Devices in the new 2200 range are ideal for vibration analysis. As standard, they operate over a 160 G range, have a rapid response to shock loading and can withstand forces in excess of 10 000 G. The sensors have isolated AC outputs with sensitivities of 100 V/G, with alternate sensitivities available on request. In addition, they offer good bias voltage stability with typical drift no more than 3 mV/° with a bias voltage of 11,6 V.
A second new range, the 2300 series, comprises dual output devices. Here, sensors replicate AC output for vibration analysis of the 2200 range, but also have an output proportional to temperature (at 10 mV/°C, a standard sensitivity for many data-loggers).
For monitoring velocity, Monitran’s third new range, the 2285 series, features devices with DC outputs (4-20 mA) proportional to RMS velocity, with outputs proportional to peak velocity available on request. These are ideal for providing machine protection by allowing monitored velocity (i.e. speed of vibration) levels to be included within a condition based predictive maintenance strategy. The maximum sensitivity is typically 0-100 mm/s. By incorporating full internal screening within the 2285 range, potential earth loop problems are eliminated and installation is simplified.
The fourth range of the sensor is the Monitran 2287 series, offering the same features as the 2285 series but with the DC output proportional to acceleration as opposed to velocity. RMS is standard but with peak as an option. The fifth and sixth ranges, series 2385 and 2387, add secondary outputs for temperature (10 mV/°C) to the 2285 and 2287 ranges.
Groundwater level measurement using LoRa module Instrotech
Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.
Read more...Distance sensor for confined spaces ifm - South Africa
Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.
Read more...Long-range laser distance measuring sensor Vepac Electronics
Sensors & Transducers
The MS-100A is a long-range laser distance measuring sensor with a range of 150 to 1000 mm. This sensor excels in applications requiring extended measurement capabilities, such as quality control and logistics.
Read more...Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...Infrared solutions for glass manufacturing challenges Instrotech
Temperature Measurement
In the glass industry, infrared temperature monitoring is crucial for maintaining product quality and process efficiency. Instrotech has infrared sensors and cameras which provide non-contact temperature measurements, making them ideal for these high-temperature environments.
Read more...Verification using Heartbeat Technology is a breeze Endress+Hauser South Africa
Sensors & Transducers
Heartbeat Technology reflects Endress+Hauser’s long-term commitment to enhancing measurement reliability and efficiency across a growing product portfolio.
Read more...Enhancing efficiency and reliability in the energy sector VEGA Controls SA
Sensors & Transducers
VEGA offers practical, reliable solutions through specialised measuring instruments and deep industry know-how, all tailored to help energy companies keep costs under control while meeting strict regulatory standards.
Read more...Condition monitoring for hydroelectric plants ifm - South Africa
Sensors & Transducers
The energy company Compagnia Valdostana delle Acque generates electricity in the region’s 32 hydroelectric power plants with a total capacity of over 900 MW. Vibration sensors from ifm monitor the maintenance requirements of the turbines and power generators at all times.
Read more...Senix sensors provide flood warnings Instrotech
Flow Measurement & Control
To create the world’s most sophisticated flood monitoring and forecasting system, the US State of Iowa’s Flood Centre (IFC) uses more than 200 Senix ToughSonic 30 and ToughSonic 50 ultrasonic sensors to measure water levels in streams across the state.
Read more...Precision sensing for water treatment ifm - South Africa
Sensors & Transducers
ifm electronic has introduced two next-generation sensors designed for South Africa’s bulk and wastewater sector, engineered to withstand harsh environments and deliver long-term reliability.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version