Storage tanks in the oil and gas industry are used to hold environmentally damaging liquids that can cause serious incidents, including personnel injuries, if not properly monitored. A faulty fuel gauge can fail to alert operators that fuel storage is reaching an alarmingly high level, which could cause large quantities of petrol to overflow. As a consequence, vapour clouds are formed leading to explosions or fires that can last for days. Overfill prevention systems are a must for obvious reasons, but they can be costly, tedious to implement and difficult to maintain if custom built.
A pre-configured solution package reducing commissioning time and maintenance costs,
Endress+Hauser’s solution reduces project costs by up to 20% and lowers implementation risk as it is based on a standard approach with repeatable designs that have been tested and documented. The system was developed together with Rockwell Automation and offers a complete and integrated solution able to address the entire safety loop, from measuring and monitoring to correcting elements. Devices are pre-integrated which means there is only a need for on-site parameter set up. The solution is also modular and thus easily extended.
Compliance with industry best practices, API 2350 and IEC 61511 standards, the solution delivers the following:
* Scalability to user needs.
* Suitability for manual and automated operated facilities.
* Up to SIL level 3.
* Display of detailed warning and alarm messages on both text display and operating panel.
* Fail-safe high warnings and alarms.
* Integrated automated proof-test procedure.
* Automatic recording of all events for transparency and traceability.
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.
Read more...A fresh approach to dairy processing VEGA Controls SA
Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.
Read more...Keeping a close eye on product quality and purity Endress+Hauser South Africa
Sensors & Transducers
Colour measurements are necessary in many processes to avoid product losses and ensure safe production and batching. The Memosens Wave CKI50 process spectrometer from Endress+Hauser is a compact, robust and process-friendly device allowing quality, batching and phase checks to be performed by a single instrument for the entire visible colour spectrum.
Read more...Where simplicity meets reliability Endress+Hauser South Africa
Temperature Measurement
The new iTEMP TMT31 temperature transmitter from Endress+Hauser combines simplified selection, ordering, installation and operation with the highest reliability and long-term stability in one product.
Read more...Multiphase level measurement Mecosa
Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.
Read more...Simple and efficient level measurement in the mining, minerals and metals industries Endress+Hauser South Africa
Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.
Read more...Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter
Read more...Powering sub-Saharan Africa’s energy future VEGA Controls SA
Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.
Read more...Enhancing process efficiency Endress+Hauser South Africa
Fieldbus & Industrial Networking
In the ever-evolving landscape of industrial process automation, staying ahead of technological advancements is crucial. The Endress+Hauser FieldPort SWA50 is a game-changer, offering a seamless integration of Bluetooth and WirelessHART communication for HART field devices.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version