Level Measurement & Control


Measuring mineral rock in the storage bunker

July 2013 Level Measurement & Control

In the mining industry a ready supply of mineral rock needs to be kept on hand in order to ensure a continuous production process. The raw material is stocked in large bunkers with heights of over 30 m and diameters up to 20 m. The huge dimensions of the silos make it necessary to fill and empty at several places. To ensure an even filling and emptying of the bunker, the mineral rock level is measured at different places inside the bunker. Vega has a product especially developed for bulk solids applications.

Level measurement with Vegapuls 68

The radar sensor Vegapuls 68 measures the level of the mineral rock without interference from dust, abrasion, product dampness and filling noise. Silo height is no problem either, as horn and parabolic antennas are available for the reliable handling of measuring ranges up to 75 m. Through the use of multiple radar sensors, different filling points can be measured and an even distribution of material ensured: the different measurement setups do not influence each other.

Setup and commissioning is as simple as selecting a few application parameters and the software ensures optimal instrument configuration. Users can even retrofit on already installed instruments, quickly bringing an existing system up to date.

Overfill protection with Vegacap65

Vega has another instrument that is ideal for use in the bulk solids silo situation. The capacitive level switch, Vegacaop 65, is a tried and tested solution for reliable bunker overfill protection. Its robust construction makes it ideal for rough operating conditions and its sensor delivers a reliable switching signal regardless of the nature of the rock. The gravity weight on the cable probe can be shortened or lengthened. It is made of standard or high-grade steel which resists the hardest blows and ensures a long service life.

For more information contact John Groom, Vega Instruments SA, +27 (0)11 795 3249, [email protected], www.vega.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Small, inexpensive radar level transmitters
VEGA Controls SA Level Measurement & Control
Anyone who needs to keep processes running needs level measurement technology that measures reliably. However, what is needed is not always the most ‘fully featured’ solution, but the smartest one. This is exactly what VEGAPULS radar transmitters of the BASIC series do.

Read more...
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.

Read more...
A reliable water supply: The make or break in building metros across South Africa
VEGA Controls SA Flow Measurement & Control
South Africa’s urban centres encounter substantial water supply challenges. Maintaining stable water infrastructure is essential for the health, economic vitality and well-being of communities.

Read more...
A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
A cure for measurement headaches in contract manufacturing
VEGA Controls SA Editor's Choice
A contract manufacturing organisation provides support to pharmaceutical and biotechnology companies in the manufacturing of medications, formulations and substances. VEGA’s measurement solutions offer accuracy and reliability for monitoring levels and pressures during the manufacturing process.

Read more...
Multiphase level measurement
Mecosa Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...
A new era in radiometric level and density measurement
Mecosa Level Measurement & Control
The LoopSeries LB 430 radiometric detector from Berthold Technologies has a revolutionary power solution and sets new standards in level and density measurement.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved