Low resistance digital ohmmeter
March 2013
Electrical Power & Protection
Megger’s DLRO200-115 ohmmeter checks and measures contact resistance in high voltage circuit breakers, disconnecting switches (isolators), busbar joints and other low resistance applications. The test set accurately measures resistances ranging from 0,1 μohm to 1 ohm at high currents.
It is a versatile instrument that can provide test currents from 10 to 200 amps, subject to the load resistance and supply voltage. For applications that demand a smooth DC current, the DLRO200-115 has extra filtering on the output to reduce mains frequency ripple. It can drive 200 amps through a total current loop resistance of 11 milliohms. The filtered output also eliminates magnetic transients that could inductively trip a breaker’s control (bus differential relay) if left in the test circuit.
The unique design allows the weight and size of the Megger DLRO200-115 to be kept to a minimum; the instrument weighs less than 15 kg. This, together with a water/dust ingress rating of IP54, makes the test set equally applicable in the workshop, on the production floor or in the field.
Three hundred sets of results can be stored in the on-board memory for later download to a PC or output directly to a printer via the RS232 port. The user may also add notes to any stored result by using the on-board alphanumeric keypad, thereby making later identification of results easier to determine.
For more information contact Stuart Ashton, Surgetek, +27 (0)11 792 1303, [email protected], www.surgetek.co.za
Further reading:
Zinc-based batteries power a more sustainable energy future
Electrical Power & Protection
Zinc-based batteries are gaining ground as a safe, recyclable and cost-effective energy storage option, from consumer electronics to grid-scale systems. The International Zinc Association’s Simon Norton explains why zinc is well placed to support the clean energy transition.
Read more...
Energas introduces lower-cost German gas genset for South African market
Electrical Power & Protection
Energas Technologies will supply R Schmitt Enertec’s new Energy Line genset to the South African market, offering German-engineered gas-to-power generation of 400 to 500 kW at a lower entry cost through focused standardisation and a simpler standalone architecture.
Read more...
ACTOM plays key role in large transmission substation project in Swellendam
ACTOM Electrical Machines
Electrical Power & Protection
ACTOM has been appointed to engineer, procure, construct and commission the 1000 MVA main transmission substation for the Overberg Wind Farm in Swellendam, one of the largest substations of its kind in South Africa.
Read more...
Reliable power conversion from high-voltage DC buses
Conical Technologies
Electrical Power & Protection
The MEAN WELL DDRH-240 from Conical Technologies is a high-reliability DIN-rail DC-DC converter with a wide 250 to 1500 V DC input range, deriving stable low-voltage power directly from high-voltage DC buses in renewable energy, storage, charging, railway and industrial installations.
Read more...
AES maintains a strong value and safety stance on boiler retrofits
Electrical Power & Protection
AES Commercial Director Dennis Williams explains when a boiler retrofit makes more sense than replacement, outlines the range of efficiency and emissions upgrades available, and draws the line at safety: a boiler not legally signed off is shut down, no exceptions.
Read more...
The grid needs to become more intelligent
Schneider Electric South Africa
Electrical Power & Protection
South Africa’s power grid is becoming bidirectional and far more dynamic as distributed energy resources proliferate. Schneider Electric’s Nishandra Bajinath explains why digitalisation, DERMS and aggregation are essential to keep this increasingly complex grid stable and efficient.
Read more...
ACTOM’s integrated electrical solutions reduce project risk and accelerate delivery
Electrical Power & Protection
ACTOM has secured multiple orders across four divisions for the Naos-1 hybrid solar and battery project in the Free State, demonstrating its integrated model for supplying the full electrical chain from high-voltage equipment to distribution transformers.
Read more...
Smarter energy management starts with intelligent electrification
ABB South Africa ABB Electrification Products
Electrical Power & Protection
ABB Electrification specialists Adeline Maleka and Nokulunga Dube explain how the convergence of electrification, digitalisation and automation is helping South African industries gain real-time visibility, reduce energy waste and build operational resilience.
Read more...
Electricity security is a strategic imperative for Africa’s growth and industrial future
Electrical Power & Protection
Grid resilience has become as strategic a priority as generation capacity. Africa needs robust transmission and distribution networks, skilled engineers and resilient supply chains to power its energy transition.
Read more...
Mining’s decarbonisation journey starts now
Schneider Electric South Africa
Electrical Power & Protection
Mining companies are embedding decarbonisation into core operational strategies as technology, advisory services and digital platforms help translate ESG commitments into measurable environmental and business outcomes.
Read more...
printer friendly version