Acromag’s new TT230 series of isolated transmitters are designed to provide easier installation and setup. These signal conditioners are only 12,5 mm wide for high-density mounting on DIN rails and provide a convenient USB connection to a PC for simple, precise configuration using Windows software. A number of models are available to isolate and convert thermocouple, RTD, voltage or current input signals to a 4-20 mA output. These two-wire instruments are loop-powered and support both source or sink output wiring connections on the current loop with a 12-32 VDC supply. A ruggedised design features -40 to 80°C operation, electrical noise immunity and surge protection. CE and UL/cUL Class 1 Division 2 Zone 2 hazardous location approvals are pending.
Each model accommodates a variety of signal types. Thermocouple units accept eight different sensor types (J, K, T, R, S, E, B, N), as well as ±100 mV inputs. RTD units accommodate 2-, 3-, and 4-wire 100 ohm Platinum sensors or 0-900 ohm linear resistance inputs. Voltage models convert bipolar signals from ±10 mV to ±150 VDC with multiple selectable ranges. The current units are widely adjustable to support ±20 mA, 0-20 mA, and 4-20 mA DC input signals.
All models deliver high accuracy, superior noise resistance and fast response times. They also demonstrate excellent linearity and stability with very low temperature drift. Software calibration eliminates zero/span pots, DIP switches, and pushbuttons for easy programming of ranges, over/under scale thresholds, and fail-safe settings. Programmable over/under range and fault/alarm levels enable identification of a runaway process or broken sensor. Selectable up/downscale failsafe modes ensure a safe, predictable shutdown with a NAMUR-compliant fault response.
High-performance LineScan camera
Sensors & Transducers
Lynred, a global leader in infrared imaging technologies, has launched its next-generation SWIR LineScan camera and sensor, specifically designed for the inspection of silicon wafers, solar panels and waste management.
Read more...Online monitoring solution optimises asset performance across SKF South Africa
Sensors & Transducers
SKF’s sales, service and management teams has joined forces to deliver an advanced, integrated online monitoring solution for a key customer in Tunisia, operating nine mines, five plants and eleven production lines.
Read more...OMRON launches new non-contact
Sensors & Transducers
OMRON has unveiled its latest innovation in non-contact safety door switches, the D40A-2, which is designed to enhance workplace safety and streamline machinery operations.
Read more...Vibration monitoring in three axes ifm - South Africa
Sensors & Transducers
Machine vibrations are important indicators when it comes to assessing the current condition of a machine. ifm’s new and smart IO-Link vibration sensor helps to implement a simple and scalable condition monitoring approach using but a single device.
Read more...Smart solutions for weighing in hazardous milling zones
Sensors & Transducers
Minebea Intec supplies highly accurate weighing and inspection solutions that enable milling companies to organise their processes safely, efficiently and compliantly - even in hazardous areas.
Read more...Optimise sludge treatment and reduce operational costs
Sensors & Transducers
The Endress+Hauser inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission. This is considerably less time consuming than the process of determining total solids content in a laboratory.
Read more...Family of analysers for smart and efficient chlorine measurement ABB South Africa
Sensors & Transducers
ABB has launched ChloroStar, a family of sensors, transmitters and accessories for accurate and reliable chlorine measurement and analysis that enable users in the water, wastewater and other industries to control chlorine more efficiently, enhancing treatment and increasing process uptime.
Read more...Leading the way with Level 9 PDS implementation
Sensors & Transducers
Applying a Level 9 Proximity Detection System (PDS) to a mining operation is as much about changes in behaviour as it is about technical solutions, according to Pieter Wolfaardt from Apex, Booyco Electronics’ training partner of choice.
Read more...Enhanced automated weld inspection system
Sensors & Transducers
SmartRay is offering the release of new hardware for its weld inspection system, JOSY, delivering elevated performance and flexibility in the process.
Read more...Leaders in sensor technology Gail Norton Instrumentation
Sensors & Transducers
Photoelectric eyes have always needed perfect working conditions, but in the workplace there is no such thing. Steam, water, light and dirt interfere with most photoelectric eyes, but never with a Telco sensor.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version