Electrical Power & Protection


DC-DC converters from MeanWell

June 2012 Electrical Power & Protection

Mean Well has expanded its range of DC-DC converters with three new models covering power levels from 3 to 60 W.

The SPU03 is a 3 W device in a single-in-line package measuring 20x8x10 mm. It exhibits up to 88% efficiency and can operate in an ambient temperature range from -40 to 90°C. Equipped with a standard pin assignment, it features 3000 VDC input/output isolation, low ripple noise, CE/FCC compliance and built-in short circuit protection, making it suitable for industrial control, telecom/datacom and distributed power architecture applications.

The 30 W SKM30 series is housed in a 5x3x11 mm dual-in-line package and possesses up to 90% efficiency over the -40 to 55°C temperature range. Equipped with a standard pin assignment, the series features 2:1 input range, 1500 VDC input/output isolation, short circuit/overload/input and output over-voltage protection, low ripple noise, built-in remote on/off control and output trimming. The fully encapsulated packaging withstands the influence of dust and moisture in harsh environments, making it suitable for industrial control, telecom/datacom and distributed power architecture.

Finally, the dual in line 60 W converters of the the SKA60 devices have up to 93% efficiency and can be operated at full load without any heatsink from -40 to


+55°C, and up to +70°C with derating. Fully encapsulated packaging aids the converters’ heat dissipation and allows them to withstand the influence of dust and moisture in harsh environments, meaning they are suitable for industrial control, telecom/datacom, vehicle, vessel, backup systems and any application that uses rechargeable batteries as the power source.

For more information contact Ettienne van der Westhuizen, Current Automation, +27 (0)11 462 4253, ettienne@rectifier.co.za, www.rectifier.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Modular UPS system with scalable, high-availability architecture
Electrical Power & Protection
Legrand South Africa has launched its fifth-generation TriMOD three-phase modular UPS, available from 10 to 80 kW. The system features hot-swappable modules, multiple input/output configurations, and up to 99% efficiency in Eco Mode, designed for data centres and critical industrial environments.

Read more...
Accurate illuminance measurement for safer, more efficient environments
Electrical Power & Protection
The Sonel LXP-10A illuminance meter is designed for accurate measurement of lighting levels in industrial environments where adequate illumination is essential.

Read more...
Why mining operations need local lightning early warning
Senseca Editor's Choice Electrical Power & Protection
Lightning can develop into a serious mining hazard before the first local strike, leaving crews little time to stop work and reach safety. Local early-warning technology can provide valuable lead time, allowing mines to connect developing storm conditions to defined trigger actions that protect people, explosives and equipment.

Read more...
South Africa’s dirtiest fuel is building its most resilient boilers
Electrical Power & Protection
Steinmüller Africa argues that duff coal, the low-grade fines and discards stockpiled over decades, can now underpin reliable, compliant industrial boilers using mature circulating fluidised bed combustion technology, turning a long-standing liability into a phased energy transition pathway.

Read more...
Retrofitting for sustainability
Schneider Electric South Africa Electrical Power & Protection
As budgets tighten and sustainability targets increase, retrofit and modernisation strategies are gaining traction across Africa, allowing organisations to upgrade only what limits performance while preserving existing infrastructure and extending asset life.

Read more...
USB-Datalogger for voltage 0 to 30 V DC
Vepac Electronics Electrical Power & Protection
The PeakTech 5186 is a data logger for DC voltages from 0 V to 30 V with terminals on the top of the device.

Read more...
Pole-top boxes for smarter, more secure electricity networks
Electrical Power & Protection
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.

Read more...
Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.

Read more...
Engineering resilience into Africa’s energy future
Electrical Power & Protection
Zutari’s managing director of water explains how Burundi’s landmark Jiji and Mulembwe hydropower projects demonstrate what resilient, climate-adapted infrastructure delivery looks like – and what this means for Africa’s energy future.

Read more...
Voltage Tester with LED-Display
Vepac Electronics Electrical Power & Protection
The PeakTech 1094 is a reliable and robust two-pole voltage tester that has been specially developed for the safe and precise measurement of AC and DC voltages in the 12 to 400 V range.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved