Measuring residual chlorine without chemical reagents

July 2001 Maintenance, Test & Measurement, Calibration

Optimal disinfection and minimal chlorine dosing is achieved by on-line measurement of residual chlorine. ATI's polargraphic membraned sensor measures residual chlorine directly, in most cases without the need for sample pre-treatment. So the system provides dependable measurements without the need for expensive chemicals or time-consuming maintenance.

Residual chlorine measurement has traditionally been done by injecting chemicals into the sample and measuring the products of a chemical reaction. In contrast, ATI's sensor consists of a pair of electrodes immersed in a conductive electrolyte and isolated from the sample by a chlorine-permeable membrane. Two sensors are available - one for potable water, cooling towers and industrial wash-water for concentrations as high as 0-200 ppm. The second version is designed for chloramine* measurement in wastewater systems. ATI also provides a flow cell assembly to optimise the performance of the electrode. The user can select measuring ranges from 0-2,000 to 0-200,0 ppm with a linearity of 0,5%. (*Chloramine is a combination of ammonia and chlorine - used for disinfecting water in some parts of the world.)

N&Z Instrumentation & Control

(011) 435 1080

enquiries@nz.co.za

www.nz.co.za

Further reading:

Modernising acid cooler protection without disrupting production
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Omniflex has supplied an advanced anodic protection control system to phosphate producer Foskor, replacing a legacy transformer rectifier system while maintaining uninterrupted production. The distributed PowerView CP solution provides remote monitoring and DCS integration.

Read more...

---

Engineering partnership delivers longer life for vibrating feeders in mining
Maintenance, Test & Measurement, Calibration
: OST-Africa’s combination of VISAM vibrating motors and advanced rubber mounting technology has helped Euro Sales achieve a 30 to 40% increase in component life on vibrating feeders at several major mining operations, with zero mount failures in the first 12 months.

Read more...

---

When oil can’t take the heat
Maintenance, Test & Measurement, Calibration
Unlike the slow ageing of oxidation, thermal breakdown is the sudden chemical collapse of a lubricant under excessive heat. Steven Lumley of WearCheck explains how it happens, where it strikes, and how oil analysis detects it.

Read more...

---

Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.

Read more...

---

Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.

Read more...

---

Rethinking corrosion protection in process plants
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.

Read more...

---

Installation safety tester
Vepac Electronics Maintenance, Test & Measurement, Calibration
A combination measuring device for testing electrical installations, offering safety tests including RCD, voltage, loop, low-resistance, earth resistance and insulation checks via a 3,5-inch TFT colour display.

Read more...

---

Bringing predictive maintenance to the next level in the pulp and paper industry
Maintenance, Test & Measurement, Calibration
ennomotive has launched an international competition seeking innovative predictive maintenance solutions for conveyor belt systems, addressing a real operational challenge faced by pulp and paper company CMPC.

Read more...

---

Vibration sensor with CANopen interface for mobile machines
ifm - South Africa Maintenance, Test & Measurement, Calibration
ifm’s 3-axis VMB301 condition monitoring sensor integrates into the vehicle network via CANopen, delivering real-time bearing, vibration and temperature data to help mobile machines avoid costly damage and downtime.

Read more...

---

Linear regulated 2-channel laboratory power supply
Vepac Electronics Maintenance, Test & Measurement, Calibration
Vepac Electronics offers a dual-channel laboratory power supply built for safe, precise testing in laboratories and workshops.

Read more...

---