Electrical Power & Protection


All-in-one UPS

May 2012 Electrical Power & Protection

New from Adelsystem is the all-in-one family of uninterruptible DC power supplies. These offer reliable, consistent backup of the DC supply, and are ideal where frequent power outages or dips occur. They are particularly useful where there is a PLC or other digital communication.

The Adelsystem all-in-one is very flexible. Wide input voltage (115–230 V AC or 400–500 V AC) coupled with a selection of output voltages (12, 24 and 48 V DC) reduces the spares holding requirement. Different versions offer from 3 to 20 amps of current. Designed to offer safe operation, it has the following standard features: output protected against short circuit and overload; high insulation between primary and secondary; protection against deep battery discharge; protection against reverse polarity connection; and detection of batteries with incorrect voltage

The battery charging circuit contains charge curves for various types of batteries. These curves are user selectable by means of jumpers. Multistage charging (boost, trickle and recovery modes) ensures a fast recharge and also the recovery of deep discharged batteries. The maximum charging current to the battery is user adjustable by means of a potentiometer on the front of the unit. To protect the battery, the unit will shut down when the cell voltage reaches 1,5 V, avoiding deep discharge and battery damage. The unit also performs a battery life test to guarantee battery reliability. It continually tests the internal impedance of the cells and through a battery stimulation circuit is able to detect sulphated batteries and those with short circuit cells.

For more information contact Rodney Topham, RET Automation Controls, +27 (0)11 453 2468, rodney.topham@retautomation.com, www.retautomation.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Modular UPS system with scalable, high-availability architecture
Electrical Power & Protection
Legrand South Africa has launched its fifth-generation TriMOD three-phase modular UPS, available from 10 to 80 kW. The system features hot-swappable modules, multiple input/output configurations, and up to 99% efficiency in Eco Mode, designed for data centres and critical industrial environments.

Read more...
Accurate illuminance measurement for safer, more efficient environments
Electrical Power & Protection
The Sonel LXP-10A illuminance meter is designed for accurate measurement of lighting levels in industrial environments where adequate illumination is essential.

Read more...
Why mining operations need local lightning early warning
Senseca Editor's Choice Electrical Power & Protection
Lightning can develop into a serious mining hazard before the first local strike, leaving crews little time to stop work and reach safety. Local early-warning technology can provide valuable lead time, allowing mines to connect developing storm conditions to defined trigger actions that protect people, explosives and equipment.

Read more...
South Africa’s dirtiest fuel is building its most resilient boilers
Electrical Power & Protection
Steinmüller Africa argues that duff coal, the low-grade fines and discards stockpiled over decades, can now underpin reliable, compliant industrial boilers using mature circulating fluidised bed combustion technology, turning a long-standing liability into a phased energy transition pathway.

Read more...
Retrofitting for sustainability
Schneider Electric South Africa Electrical Power & Protection
As budgets tighten and sustainability targets increase, retrofit and modernisation strategies are gaining traction across Africa, allowing organisations to upgrade only what limits performance while preserving existing infrastructure and extending asset life.

Read more...
USB-Datalogger for voltage 0 to 30 V DC
Vepac Electronics Electrical Power & Protection
The PeakTech 5186 is a data logger for DC voltages from 0 V to 30 V with terminals on the top of the device.

Read more...
Pole-top boxes for smarter, more secure electricity networks
Electrical Power & Protection
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.

Read more...
Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.

Read more...
Engineering resilience into Africa’s energy future
Electrical Power & Protection
Zutari’s managing director of water explains how Burundi’s landmark Jiji and Mulembwe hydropower projects demonstrate what resilient, climate-adapted infrastructure delivery looks like – and what this means for Africa’s energy future.

Read more...
Voltage Tester with LED-Display
Vepac Electronics Electrical Power & Protection
The PeakTech 1094 is a reliable and robust two-pole voltage tester that has been specially developed for the safe and precise measurement of AC and DC voltages in the 12 to 400 V range.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved