Electrical Power & Protection


Two-pole phase comparators

April 2012 Electrical Power & Protection

Dehn’s PHV phase comparators are two-pole devices that offer safe and reliable operation while testing for in-phase conditions in three-phase electrical systems. They are suitable for rated voltages up to 36 kV/ 50 Hz, have SABS approval and meet the requirements of IEC 6148 standards. The equipment has distinctive red rings on both test prods that mark the end of the insulating sections in the direction of the operating head/indicator. It represents a visible limit of contact with live and earthed system parts, as well as the depth of penetration allowed into electrical systems. Types PHV are suitable for use in indoor and outdoor systems, but not in wet conditions.

The eccentric mounting of the indication ensures good visibility from various angles and provides for an out-of-phase condition when the phase angle between the two parts of the system to be tested is between 60° and 300°. A clear and sharp threshold is provided and the indication remains at a constant frequency over the testing range.

Various colour coded test prods are available and are selected for the desired voltage, and their simple bayonet connection ensures easy coupling to the basic test unit. The compact range is ideal for use in areas where space is limited, while standard test prods are suited for areas where larger span and separation is required. Test prods with a 90° degree angle are available for testing in switchgear where the axis of the bushing is mounted in a vertical plane.

Used in contact with the parts to be tested, the PHV phase comparator is insensitive to magnetic and electrical interference with false indications completely eliminated.

For more information contact Johan van Staden, Surgetek, +27 (0)11 792 1303, [email protected], www.surgetek.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Measuring and analysing PV circuit performance
Comtest Electrical Power & Protection
Regardless of the test method, you must know the plane of array irradiance and cell temperature to evaluate PV circuit performance. Proper sensor types and test methods like the Fluke Solmetric PVA 15i-V curve tracer should be used for reliable results.

Read more...
Enabling Africa’s solar potential – lighting the way with technology
Electrical Power & Protection
As the global population continues to grow, energy demand also rises. ABB can help bridge the gap throughout the renewable power value chain, including consulting, generation, storage, transmission, monitoring, control and optimisation.

Read more...
AES and the great decarbonisation debate
Electrical Power & Protection
Although many manufacturing and industrial companies have objectives to reduce the use of fossil fuels, there are not yet any silver bullets in the green fuel space. Supply and logistics constraints, high costs and technological limitations are just some of the challenges encountered by AES, as they assist an increasing number of clients to investigate the use of more environmentally sustainable, lower carbon fuel alternatives, thereby obviating the requirement to pay

Read more...
Distributed servo drive system with extended voltage range and additional braking option
Beckhoff Automation Electrical Power & Protection
Beckhoff’s AMP8620 supply module and AMP8805 distribution module are now also available with an extended voltage range for the AMP8000 distributed servo drive system.

Read more...
Data acquisition modules
Vepac Electronics Electrical Power & Protection
The D1200 current input modules from Vepac include one discrete digital input and two open-collector digital outputs for monitoring On/Off signals or controlling solid-state relays and annunciators. The digital outputs can also be programmed to operate as HI/LO alarm outputs based on the input current level.

Read more...
Grid management systems are the backbone of modern T&D networks
ACTOM Electrical Machines Electrical Power & Protection
Grid management systems are the linchpin of modern transmission and distribution networks, ensuring their reliable and efficient operation.

Read more...
Electrical power solutions from TRAFO
Electrical Power & Protection
Having rapidly carved a niche in dry-type transformer applications in Africa, Trafo Power Solutions has steadily grown its offerings, and now sees a future as a leading provider of electrical power solutions. ...

Read more...
Boiler update at food processing plant transforms production process
Electrical Power & Protection
The replacement of 78 year-old boilers at a Western Cape food processing plant by Associated Energy Services has not only proven to be a worthwhile investment for the client, but has transformed its entire production process.

Read more...
Three financing trends driving clean energy in the Global South
Schneider Electric South Africa Electrical Power & Protection
The Global South is at a critical juncture in its energy transition, grappling with challenges that demand immediate action. To finance its energy targets, the World Economic Forum’s Network to Mobilise Clean Energy Investment in emerging markets and developing economies has developed a playbook of over 100 financing mechanisms and de-risking tools that have successfully helped narrow the clean energy financing gap in emerging and developing economies.

Read more...
New generation low power frequency inverters
Bearing Man Group t/a BMG Electrical Power & Protection
New to BMG’s electromechanical range are energy-efficient Synergy PI150 series frequency inverters, which have been designed for efficient use in many applications.

Read more...