Industrial Computer Hardware


Compact PC control from Beckhoff

March 2012 Industrial Computer Hardware

Multi-optional interface enables integration with all common fieldbuses and industrial Ethernet systems.

Beckhoff Automation’s CX9020 is a DIN rail-mountable controller with ARM Cortex A8 CPU and microSD card with large storage capacity and very compact design. The Embedded PC integrates a CPU, numerous IT connectivity solutions and optional interfaces, a power supply and a direct I/O interface for Beckhoff I/O systems, all in a compact housing. The unit automatically detects the connected bus or EtherCAT terminals and switches to the respective mode for more convenient system management.

The CX9020 CPU has access to 1 GB of internal DDR3 RAM. It comes with a 256 MB microSD card for the operating system. A free microSD card slot can be used for additional operator data. In addition, 128 kbyte of NOVRAM are available for data storage in the event of a power failure.

The basic version features two 10/100 Mbit/s Ethernet ports, four USB 2.0 connections and a DVI-D interface. The multi-optional interface enables integration of an additional interface, eg, for EtherCAT (slave only), Profinet, Ethernet/IP, Profibus, CANopen, DeviceNet, serial interface or audio. In combination with the TwinCAT automation software platform from Beckhoff, the system becomes a high-performance PLC and Motion Controller that can be used with or without visualisation.

The extended operating temperature range of -25 to 60°C enables application in demanding environments covering a wide range of manufacturing facility types and outdoor applications, including wind turbines and solar power plants. The operating system is Microsoft Windows Embedded Compact 7.

For more information contact Kenneth McPherson, Beckhoff Automation, +27 (0)11 795 2898, [email protected] , www.beckhoff.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Multi-touch panel generation in a smart design
Beckhoff Automation Operator Interfaces, Switches & Relays
Following over 25 years of successful in-house panel production and 12 years of expertise in multi-touch design, Beckhoff is bringing out a new smart panel design, the Next multi-touch panel generation.

Read more...
Next-generation PLC technology with advanced chatbot functionality
Beckhoff Automation IT in Manufacturing
Beckhoff is taking automation technology to the next level with TwinCAT PLC++. Both engineering and runtime are noticeably faster, without compromising on TwinCAT’s signature strengths of seamless integration, compatibility and openness.

Read more...
German Chancellor visits Beckhoff at Hannover Messe
Beckhoff Automation News
As part of the traditional Hannover Messe opening tour, Federal Chancellor of Germany, Olaf Scholz visited German company, Beckhoff Automation. Hans Beckhoff, managing director and owner of Beckhoff Automation, presented his company and its comprehensive expertise in the field of software and AI.

Read more...
PC-based control for fertiliser
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
On a farm in the USA, valuable ammonia is extracted from slurry and processed into ammonium sulphate. NSI Byosis has transformed this complex process into a flexible modular system. This modular approach requires an automation solution with flexible scalability in both hardware and software, which this Dutch company has found in PC-based control from Beckhoff.

Read more...
New modules for distributed integration of intrinsically safe signals
Beckhoff Automation IS & Ex
Beckhoff provides a compact acquisition solution for intrinsically safe signals up to zone 0/20 with the IP67-protected EtherCAT Box modules of the EPX series.

Read more...
BVS camera and ident sensor
Industrial Computer Hardware
The Balluff BVS Smart Camera and Ident Sensor delivers high-performance machine vision for industrial automation. It provides precise object detection, barcode reading and quality inspection in real time.

Read more...
PC-based automated production system for photo calendars
Beckhoff Automation Fieldbus & Industrial Networking
Producing up to 1800 photo calendars per hour using more than 90 servo axes, Durrer Spezialmaschinen develops a wide variety of special-purpose machines from the design phase to commissioning. A new production system for photo calendars proves the importance of comprehensive motion control expertise, with AM8000 servomotors and AX5000 servo drives from Beckhoff used for over 90 dynamically controlled axes.

Read more...
Beckhoff’s TwinCAT Vision functionality extended
Beckhoff Automation Fieldbus & Industrial Networking
The Beckhoff TwinCAT 3 Vision software portfolio offers additional image processing functions and extra options for camera integration.

Read more...
Get started with machine vision right away
Beckhoff Automation Fieldbus & Industrial Networking
The VUI2000 series from Beckhoff is being joined by four new vision units.

Read more...
TwinCAT Vision functionality extended
Beckhoff Automation IT in Manufacturing
The image processing and camera integration capabilities of Beckhoff’s TwinCAT 3 Vision software have been expanded.

Read more...