January 2011Maintenance, Test & Measurement, Calibration
Instrotech offers the LPP30 pneumatic test pumps to generate pressure and vacuum for checking mechanical and electrical pressure measuring instruments. These pumps generate pressure up to 35 bar and vacuum to -0,95 bar. Pressure tests can be undertaken in workshops, laboratories or on site at the measuring point.
Accuracies achieved are 0,025 to ±1,0% FS dependent on reference instruments used. The reference instrument is screwed directly onto the top of the pump and the unit under test is connected via a tube incorporating an adapter. Easy to operate, the unit incorporates a fine adjustment valve for precise pressure readings. The pump is supplied in a compact plastic case to protect against damage and accommodate additional fittings.
Collect data three times faster SKF South Africa
Maintenance, Test & Measurement, Calibration
SKF has extended its renowned Microlog Analyzer family of data collection devices with the addition of the Microlog Analyzer dBX. Currently SKF’s most powerful diagnostic tool, this cutting-edge device redefines diagnostic capabilities, enabling users to take measurements three times faster than its predecessor.
Read more...The criticality of maintenance in the water and wastewater segment Schneider Electric South Africa
Maintenance, Test & Measurement, Calibration
In a time of water shedding, climate change and ageing infrastructure, the importance of maintenance and support in the water and wastewater segment cannot be overstated.
Read more...Pressure sensors for hydrogen applications Instrotech
Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.
Read more...Quality test tools save costs at pulp and paper mill Comtest
Editor's Choice Maintenance, Test & Measurement, Calibration
A case study on how preventive maintenance and a few good test tools avoided unnecessary motor replacements at a pulp and paper company.
Read more...Wind turbines with smart sensors Instrotech
Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...
Read more...Infrared camera for condition monitoring and early fire detection Instrotech
Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.
Read more...Pressure monitoring for oil and water tempering machines Instrotech
Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.
Read more...The logical solution to oil and gas industry corrosion
Maintenance, Test & Measurement, Calibration
The consequences of corrosion in the oil and gas industry can be astronomical. The simple culprit is metal reacting with oxygen and moisture, degrading it back to its natural state.
Read more...Lube tip: foaming is affected by oil level Wearcheck
Maintenance, Test & Measurement, Calibration
In a circulating system, it is crucial to check the oil level before introducing anti-foam agents to address a foaming problem.