Application note: Process control calibration made easy with Agilent U1401A

August 2010 Maintenance, Test & Measurement, Calibration

Abstract

In today’s world, the 4–20 mA current loop is a common method of transmitting sensor information to a remote location in industrial process-monitoring applications. Physical parameters such as temperature, pressure, speed, and liquid flow rates in the manufacturing processes are converted into signal current 4–20 mA with a signal conditioner. The 4 mA current normally represents the sensor’s zero-level output, while the 20 mA represents the sensor’s full-scale output. However, transmitting a signal current over a long distance to another system with a different ground loop may cause serious signal disruption. Loop powered isolators will eliminate the ground loop in the control systems.

This application note explains how the Agilent U1401A with simultaneous source and measure functions eases technicians’ calibration tasks in industrial process control applications.

To read more about the full article, visit: http://instrumentation.co.za/+C13062

For more information contact Steve Alves, Concilium Technologies, +27 (0)12 678 9200, steve_alves@concilium.co.za, www.concillium.co.za

Further reading:

Mini data loggers for temperature and humidity monitoring
Maintenance, Test & Measurement, Calibration
Testo’s range of four compact data loggers covers temperature and humidity monitoring for storage, refrigeration and transport applications, with USB-C or Bluetooth connectivity and capacity for up to 16 000 readings.

Read more...

---

Alternative fuels for cutting, brazing, soldering and heating
Maintenance, Test & Measurement, Calibration
Bolt and Engineering Distributors, as an authorised distributor for the Harris Products Group, is helping South African industries transition from acetylene to safer, more cost-effective alternative fuels for cutting, brazing, soldering and heating applications.

Read more...

---

Rethinking corrosion protection in process plants
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Remote monitoring is changing how cathodic and anodic protection systems are managed in process plants, giving operators continuous visibility of corrosion protection performance and enabling more proactive maintenance decisions.

Read more...

---

Installation safety tester
Vepac Electronics Maintenance, Test & Measurement, Calibration
A combination measuring device for testing electrical installations, offering safety tests including RCD, voltage, loop, low-resistance, earth resistance and insulation checks via a 3,5-inch TFT colour display.

Read more...

---

Bringing predictive maintenance to the next level in the pulp and paper industry
Maintenance, Test & Measurement, Calibration
ennomotive has launched an international competition seeking innovative predictive maintenance solutions for conveyor belt systems, addressing a real operational challenge faced by pulp and paper company CMPC.

Read more...

---

Linear regulated 2-channel laboratory power supply
Vepac Electronics Maintenance, Test & Measurement, Calibration
Vepac Electronics offers a dual-channel laboratory power supply built for safe, precise testing in laboratories and workshops.

Read more...

---

When oil gets old
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck explains how oxidation breaks down lubricating oils over time, and how routine oil analysis can catch the warning signs before equipment failure.

Read more...

---

SEW-EURODRIVE brings intelligent energy optimisation to Electra Mining
SEW-EURODRIVE Maintenance, Test & Measurement, Calibration
At Electra Mining Africa 2026, SEW-EURODRIVE will showcase its DriveRadar IoT platform for predictive maintenance and real-time energy optimisation, alongside plant energy surveys and an 1850 kW medium voltage motor display.

Read more...

---

Thermal imaging camera with high thermal resolution
Vepac Electronics Temperature Measurement Maintenance, Test & Measurement, Calibration
Vepac Electronics introduces a compact thermal imaging camera that helps technicians spot temperature problems before they become costly failures.

Read more...

---

What your lubricant really costs
Maintenance, Test & Measurement, Calibration
The purchase price of an industrial lubricant is only a fraction of what lubrication truly costs a business. Lubrication Engineers South Africa explains how shifting from unit price to total cost of ownership changes the equation significantly.

Read more...

---