Level Measurement & Control


Microwave barrier level sensor

April 2010 Level Measurement & Control

Vega’s new level sensor using microwave barrier technology, the VEGAMIP 61, is especially designed for the requirements of the bulk solids industry. Since the microwave barrier measures contactlessly, the unit has no direct contact with the medium. This is advantageous particularly for abrasive products or very high temperatures. In such cases measurement can simply be made from the outside through a microwave-permeable window, for example, of ceramic or plastic.

The microwave barrier consists of a VEGAMIP T61 transmitter and one or several VEGAMIP R61 receivers. The receiver measures the attenuation of the microwave signal and generates a switching output from it. VEGAMIP can be used as a maximum or minimum sensor with the switching delay settable from 0,1 and 20 seconds.

The instruments are fully integrated into Vega’s plics concept to offer all the advantages of a modular system. Users can choose housings of plastic, aluminium or stainless steel as well as different antenna systems and process fittings. The sensor can therefore be configured precisely for specific requirements.

For more information contact John Groom, Vega Instruments SA, +27 (0)11 958 1901, [email protected], www.vega.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Where corrosion meets control
VEGA Controls SA Level Measurement & Control
Reliable level measurement is essential in copper and cobalt processing, and at KCC, VEGA Controls is helping ensure uninterrupted operations with robust vibrating level switch technology.

Read more...
Safety, hygiene and quality management for Africa’s pharmaceutical manufacturing industry
VEGA Controls SA Level Measurement & Control
VEGA sensors support critical processes in pharmaceutical manufacturing such as fermentation, purification, formulation, filling, storage and CIP/SIP cleaning cycles. Their design ensures that pharmaceutical manufacturers can maintain sterility, reduce downtime and achieve consistent batch quality, even in demanding production environments.

Read more...
Level measurement for hygienic applications
Endress+Hauser South Africa Level Measurement & Control
Endress+Hauser’s Liquiphant is considered to be the most reliable and safe point level detector in industrial plants. The latest generation of devices is ready for Industry 4.0 and, with the Liquiphant FTL63, is ideally suited for applications with hygienic requirements.

Read more...
Groundwater level measurement using LoRa module
Instrotech Level Measurement & Control
Monitoring groundwater levels across large industrial sites is critical. Salzgitter Digital Solution was tasked with developing a fully automated and digital monitoring system using Long Range Wide Area Network technology.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Measuring what matters in oilfields
VEGA Controls SA Mass Measurement
In the oil and gas industry, enhanced oil recovery addresses key industry challenges. However, the extraction process often results in a mixture of materials that is hard to characterise.

Read more...
Reinventing grain silo management
VEGA Controls SA Editor's Choice
The VEGAPULS 6X radar sensor is designed for continuous level measurement to help overcome the challenges faced by storage in grain silos.

Read more...
Enhancing efficiency and reliability in the energy sector
VEGA Controls SA Sensors & Transducers
VEGA offers practical, reliable solutions through specialised measuring instruments and deep industry know-how, all tailored to help energy companies keep costs under control while meeting strict regulatory standards.

Read more...
Lifting the lid on bulk packaging
VEGA Controls SA Editor's Choice
Authorities impose strict requirements on pharmaceutical and cosmetic packaging. Choosing the right instrumentation, such as VEGA’s VEGAFLEX 83 for level measurement, helps manufacturers navigate the challenges with accuracy, reliability and compliance.

Read more...
Sensors measure palm oil tank level
Instrotech Level Measurement & Control
The Senix ToughSonic 30 accurately measures and monitors the level of palm oil in large tanks approximately nine metres in height.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved