Position indicator for linear valves
March 2010
Sensors & Transducers
ifm electronic’s efector Valvis sensor is installed on top of a linear valve to reliably detect the stroke position up to 80 mm and to continuously indicate the position of the valve. The sensor monitors single-seat and double-seat valves providing a condition-based monitoring solution. On double-seat valves, the sensor detects the open position, closed position and seat-lift cleaning position. On single-seat valves, the sensor detects the open position, closed position and provides an additional output for seal contact wear.
The unit features a pushbutton setup to establish set-points and an integrated LED display to indicate operating status. The principle of operation is based on ifm‘s multiplexed sensing technology. The sensor incorporates 16 individual air coils that are positioned closely together to create a linear inductive sensing field. Each coil is connected to the microprocessor-controlled electronics. As a valve stem enters into the sensing field, the coils detect the valve stem position to a resolution of 0,2 mm. The resulting signal is then compared with the teach-in switch points.
As a predictive maintenance tool, efector Valvis can monitor seal wear and seal parameters. When the sensor detects changes in the condition, it sends an alarm signal to a PLC which eliminates cycle-based maintenance. efector Valvis sensors are available in two models: a 3-wire Micro DC version with analogue output; and a 5-wire Micro DC version with three switching outputs.
For more information contact Chris Cronjé, ifm electronic SA, 086 143 6772, [email protected], www.ifm.com/za
Further reading:
Miniature inductive sensors
ifm - South Africa
Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.
Read more...
The expanding role of 3D cameras in industrial quality control
TANDM Technologies
Sensors & Transducers
Across factory floors, warehouses, mines and research centres worldwide, computer vision paired with 3D camera technology is revolutionising quality control.
Read more...
PDS implementation on mines
Sensors & Transducers
Level 9 vehicle intervention for collision avoidance has been mandatory on South African mines since 2022, yet the effective roll-out of proximity detection systems remains slower than expected. This is not due to the technical limitations of integration but to operational readiness on site.
Read more...
Monitoring analogue process values
ifm - South Africa
Sensors & Transducers
Everywhere in industry, electronic sensors are used to detect process values such as temperature, pressure or flow. Process value monitoring often takes place directly in the sensor.
Read more...
Protecting buildings’ embodied carbon with retrofitted systems
Schneider Electric South Africa
Sensors & Transducers
The World Economic Forum has said that around 80% of the buildings in existence will still be around in 2050; it is therefore essential that in order to combat climate change we retrofit them for energy efficiency.
Read more...
Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.
Read more...
Enhancing gold leaching efficiency
Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser offers a range of advanced technologies designed to enhance the stability and accuracy of pH and dissolved oxygen measurements on gold processing plants.
Read more...
Powering safer mining with PDS
Sensors & Transducers
With the mining industry under increasing pressure to prioritise safety without compromising productivity, Booyco Electronics is pushing the boundaries of Proximity Detection System and Collision Avoidance System technology across both underground and surface operations.
Read more...
The car of the future listens
Sensors & Transducers
The perception of external sounds in cars has been lacking, even in automated driving. That is why Fraunhofer IDMT-HSA is researching the integration of acoustic sensor technology in its KI4BoardNet project with the Hearing Car.
Read more...
High-performance LineScan camera
Sensors & Transducers
Lynred, a global leader in infrared imaging technologies, has launched its next-generation SWIR LineScan camera and sensor, specifically designed for the inspection of silicon wafers, solar panels and waste management.
Read more...
printer friendly version