Radio controlled presence detector
March 2010
Sensors & Transducers
The Sensolux solar presence detector from PEHA provides environmentally friendly light control in private and commercial buildings, lights being switched on when presence is detected. Once a specified light value has been reached, unnecessary lighting can be switched off saving energy over the long-term. The presence detector has proved to be a valuable asset during planning; the lack of any wiring or batteries reduces cable routing, plastering and painting costs considerably.
The unit derives its energy from solar cells; when fully charged, the detector can run for several days in complete darkness. The presence sensor registers the presence of persons and measures the current light level. This data is sent by radio to the Sensolux receiver. The parameters are set on the 2-channel receiver and two series of lights can be controlled individually. For use in rooms without daylight, the presence detector can optionally be equipped with two alkaline batteries (AAA) with a lifespan of eight to 10 years.
The user can at any time switch the lighting on or off via conventional or Easyclick radio control buttons. In semi-automatic mode, the lighting is switched on manually and switched off via the presence detector. The light-on time, light level, daylight or twilight parameters can be set in both modes.
By utilising EnOcean radio technology, the system offers maximum convenience and comfort when automatic and energy efficient lighting control is required.
For more information contact Chris Huxham, Shorrock Automation, +27 (0)12 345 4449, [email protected], www.shorrock.co.za
Further reading:
Telco sensors in conveyor belt monitoring
Sensors & Transducers
Gail Norton Instrumentation Agencies has developed a low-maintenance conveyor belt monitoring unit built on robust Telco infrared sensors, detecting belt tear and misalignment reliably in harsh coal mining environments.
Read more...
Inductive ring sensors monitor material flow in feeding technology
ifm - South Africa
Sensors & Transducers
ifm’s inductive ring sensors detect metallic parts such as screws and nuts as they pass through tubes at speeds up to 35 m/s, enabling precise counting, flow control and blockage detection, with sensitivity and output functions configurable via IO-Link.
Read more...
Reliable 1D and 2D code reading made simple
SICK Automation Southern Africa
Sensors & Transducers
SICK’s new sensingCam SEC200 image-based code reader brings supermarket-checkout simplicity to logistics and industrial identification, reading 1D and 2D codes reliably with quick browser-based setup, rugged IP65 construction and CRA-compliant cybersecurity.
Read more...
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
printer friendly version