Sensors & Transducers


Sensors and cord-sets

September 2009 Sensors & Transducers

Leading sensor expert, EGE has introduced a separate operating and display unit for the versatile EGE SDI 853 inline flow meter. This device, with an impulse output, enables remote meter reading and programming of switching points.

The configuration of the EGE SDI 853 meter allows users to install the device directly into pipes even in poorly accessible places without compromising on control and functionality. Programmable functions on the device include two switching points, hysteresis, and an on/off delay.

The amplifier unit can also be used to set the impulse value. All programmed parameters and the current reading can be accessed via a 7-segment display. The EGE SDI magnetic sensors can monitor maximum and minimum values via a switching output which can be programmed as NO or NC. It also detects reversal of flow and these measurements are displayed as negative values.

The EGE SDI flow meters have a measuring range of from 0,2 to 80 litres per minute. With a maximum measurement error of 2%, these sensors offer high accuracy in a wide range of liquid monitoring applications. Combined with the amplifier unit, the EGE SDI 853 sensors offer a cost effective solution.

The amplifier unit is connected via a 5-pole M12 plug connector and can be fitted on a DIN rail or a mounting plate.

For more information contact Gerry Bryant, Countapulse Controls, +27 (0)11 615 7556, countap@africa.com, www.countapulse.edx.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Prevent backward driving accidents
September 2020, SICK Automation Southern Africa , Sensors & Transducers
To prevent collisions and improve worker safety, Cologne-based sugar producer Pfeifer & Langen selected SICK Automation’s Visionary-B CV 3D driver assistance system for use at its reloading point.

Read more...
Conductivity sensor for CIP monitoring
September 2020, ifm - South Africa , Sensors & Transducers
The LDL200 from ifm electronic is designed to be used in cleaning processes (CIP) in the food industry.

Read more...
Conductivity sensor for interface detection
September 2020, ifm - South Africa , Sensors & Transducers
The conductivity sensor LDL100 for interface detection from ifm electronic ensures that product validation is possible at all times.

Read more...
Image processing software with Profinet interface
August 2020, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
ASSTech now offers Wenglor’s image processing software – uniVision – with new features. The latest release, Version 2.2, enables smart cameras and control units to be integrated into controls quickly ...

Read more...
Flexible sensors for individual beer
August 2020, ifm - South Africa , Sensors & Transducers
A variety of individual beers characterise the regional brewery Skanderborg Bryghus in the Danish town of Skanderborg. Unlike large commercial breweries, this brewery is largely promoted and operated ...

Read more...
Monitoring of chemical distribution
August 2020, Instrotech , Sensors & Transducers
The IoT offers smart solutions that help make life easier and more convenient, improve and streamline processes, and receive information in good time that were previously unavailable or difficult to acquire. ...

Read more...
Programmable LED strip with19 colours
August 2020, Turck Banner , Sensors & Transducers
his work light can be programmed to provide bright white light for safety or efficiency during normal operation and then change colour to indicate other machine statuses, such as red for a stop condition.

Read more...
Sensors support crisp bread production in Sweden
August 2020, ifm - South Africa , Sensors & Transducers
Production is automated according to the latest state-of-the-art technology with sensors from ifm electronic monitoring the processes from the supply of ingredients to the dispatch area.

Read more...
Ecolab certified photoelectric sensors
August 2020, Turck Banner , Sensors & Transducers
Banner’s new T18-2 photoelectric sensors have an FDA-grade shatterproof plastic housing and are IP69K rated and Ecolab certified to protect against water ingress and chemical washdown. IP69K and epoxy ...

Read more...
Fork sensor in hygienic design
July 2020, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
Production sequences in the pharmaceutical and food industries are subject to extremely demanding hygiene standards. With corrosion-free stainless steel, FDA conformity and Ecolab certification, Wenglor’s ...

Read more...