Level Measurement & Control


Endress+Hauser solve design challenge

August 2009 Level Measurement & Control

Endress+Hauser recently supplied a hydrostatic level transmitter to a Durban-based dairy supplier. The company required an instrument for low temperature level applications in a high humidity environment.

To cope under conditions such as these, Endress+Hauser has developed an hermetically-sealed contrite measuring cell – the Deltapilot S FMB70 hydrostatic level transmitter.

The product was specifically-designed for hygienic applications that require continuous cleaning and sanitising of product storage tanks. These are low temperature tanks operating at temperatures of between 3 and 4°C. As a result, the tanks as well as the instrumentation are subject to large amounts of condensate in high humidity environments.

When cleaning the tanks with steam or hot water temperature fluctuations can cause the housing to ‘breathe’, thereby drawing in some of this condensate. Once inside the housing it interferes with the electronics and can cause failures or intermittent faults.

Endress+Hauser solved the design challenge by developing an hermetically sealed contrite measuring cell with gortex filters, which allow the instrumentation to ventilate without allowing precipitate into the sensor. The contrite measuring cell has been fitted to the new Deltapilot FMB70 level transmitter to make it condensate and climate proof. It features very good reproducibility and long term stability, high reference accuracy with minimum temperature effects, extensive diagnostic functions and a HistoROM.

Deltapilot is well suited to dairy and brewery applications in high humidity environments, allowing tanks to be kept hygienically clean without compromising the integrity, accuracy, or reliability of the instrumentation.

For more information contact Bennie Swanepoel, Endress+Hauser, +27 (0)11 262 8000, [email protected], www.za.endress.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Ensuring clean and safe water
Endress+Hauser South Africa Analytical Instrumentation & Environmental Monitoring
Endress+Hauser’s comprehensive range of disinfection sensors are designed to monitor and control disinfectant levels in water treatment processes.

Read more...
Small, inexpensive radar level transmitters
VEGA Controls SA Level Measurement & Control
Anyone who needs to keep processes running needs level measurement technology that measures reliably. However, what is needed is not always the most ‘fully featured’ solution, but the smartest one. This is exactly what VEGAPULS radar transmitters of the BASIC series do.

Read more...
Meeting the challenges of tank obstructions interfering with radar
Level Measurement & Control
One of the most challenging applications for non-contacting radar level transmitters is measuring level in tanks with internal obstructions, such as agitators, heating coils, pipes, ladders or baffles. Rosemount non-contacting radar level transmitters from Emerson feature an advanced solution that enables accurate and reliable level measurements in tanks with obstructions.

Read more...
A fresh approach to dairy processing
VEGA Controls SA Level Measurement & Control
Ensuring the quality and safety of milk throughout the production process is of the utmost importance in the dairy industry. The VEGABAR pressure transmitters are suitable for hygienic applications. They are an asset in the dairy industry and have been used with success for measuring the milk level and the process pressure in storage tanks.

Read more...
Keeping a close eye on product quality and purity
Endress+Hauser South Africa Sensors & Transducers
Colour measurements are necessary in many processes to avoid product losses and ensure safe production and batching. The Memosens Wave CKI50 process spectrometer from Endress+Hauser is a compact, robust and process-friendly device allowing quality, batching and phase checks to be performed by a single instrument for the entire visible colour spectrum.

Read more...
Where simplicity meets reliability
Endress+Hauser South Africa Temperature Measurement
The new iTEMP TMT31 temperature transmitter from Endress+Hauser combines simplified selection, ordering, installation and operation with the highest reliability and long-term stability in one product.

Read more...
Multiphase level measurement
Mecosa Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
Level measurement of an acid dosing tank at a WWTP
Level Measurement & Control
Ferric chloride and other acids are essential chemical substances in water and wastewater treatment. To control the dosing of acid solutions, an Australian wastewater treatment plant uses a special container to store, mix and add these chemicals. The company opted in favour of KROHNE’s OPTIWAVE 1540 radar level transmitter

Read more...
Powering sub-Saharan Africa’s energy future
VEGA Controls SA Level Measurement & Control
Crude oil storage plays an important role in the energy infrastructure of sub-Saharan Africa. The management of crude oil storage in comes with numerous challenges, including safety concerns, environmental conditions and infrastructural limitations.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved