Accurate 4 kA current transducer
July 2009
Sensors & Transducers
LEM has introduced the ITL 4000-S current transducer for non-invasive measurement of currents up to 4000 A (RMS) in conductors of up to 268 mm diameter. The new transducer allows the isolated measurement of AC, DC and pulsed currents, up to three times the nominal value for peak measurement at frequencies up to 50 kHz (±1 dB).
Using closed-loop Fluxgate technology, highly accurate measurements of ±0,1% of IPN are achieved over the operating temperature range from -40 to +70°C. This high level of accuracy also allows the measurement of small DC currents in the presence of large AC components, which is particularly useful in applications such as transformer protection. For example, it is possible to monitor ±10 A DC over a 4000 A AC current with an uncertainty of ±1 A over an operating temperature range from -25 to +50°C. The technology also offers very good offset and gain thermal drift performance.
The large aperture of the ITL 4000-S makes it particularly suitable for measurements on high voltage DC systems, which use large-diameter cables. It features high insulation for working voltages up to 1,5 kV (RMS) in accordance with the EN 50178 standard.
The mechanical design of the transducer offers simplified access to the electronics for easy maintenance. This often avoids the need to disconnect the conductors in the final application.
The ITL 4000-S operates from a bipolar ±24 V supply provides an analogue current output and is suitable for all industrial applications as qualified against the EN 50178 industrial standard. It is particularly suitable for DC current control in transformers, in offshore wind turbines for DC power transmission or for leakage current measurement in any application with high primary currents.
Further reading:
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
Distance sensor for confined spaces
ifm - South Africa
Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.
Read more...
Optimise sludge treatment and reduce operational costs
Endress+Hauser South Africa
Sensors & Transducers
Endress+Hauser’s inline measuring devices, the Proline Teqwave MW 300 and the Proline Teqwave MW 500, determine the total solids content of wastewater directly through microwave transmission.
Read more...
Inclination sensors for motion control
ifm - South Africa
Sensors & Transducers Motion Control & Drives
The JBC dynamic inclination sensor from ifm offers accurate angle measurement in the most demanding conditions, filtering out motion disturbances such as vibrations, shocks and vehicle dynamics to deliver reliable inclination values via IO-Link or programmable switch outputs.
Read more...
printer friendly version