Sensors & Transducers


Calibrated temperature and RH sensors

October 2008 Sensors & Transducers

The new SureCross sensor is factory-calibrated to determine relative humidity to ±2% or ±3,5% (depending on model) and delivers temperature accuracy to ±0,3°C for simple critical data monitoring. Manufactured with a rugged metal housing and IP67 electronics, it provides maintenance-free operation in a wide variety of environmental monitoring applications.

Versatility

Banner designed a proprietary serial sensor interface that enables the temperature and humidity sensor and the wireless node to operate on a FlexPower battery supply for up to 20 years. Fixed and remote-mount node and sensor models enable a wide range of installation scenarios, including in-duct and freestanding applications. For remotely mounted sensors, cables in lengths up to 3 metres are available. A hydrophobic membrane filter for general applications and a sintered stainless steel filter for hostile drying areas are available to meet the requirements of the most demanding environments.

The sensor can be paired with a node that includes an integral battery supply or an external power source including battery, solar or 10–30 V d.c.. With an external power supply, two temperature and humidity sensors can be used with a single wireless node. Each node is equipped with an LCD and temperature can be displayed in Celsius or Fahrenheit; relative humidity is in a percentage from 0-100%. The node can be installed as a standalone device, or it can work in conjunction with a gateway, the wireless network controller. The SureCross Wireless Network provides a robust, reliable wireless solution with bidirectional fully acknowledged data transmission. This network employs frequency hopping spread spectrum (FHSS) and time division multiple access (TDMA) to ensure the most reliable data delivery possible. The gateway supports multiple communication outputs and seamlessly integrates with existing wired control systems.

Reliability

If radio frequency links are lost, all relevant outputs can be set to user-defined conditions until the links are re-established. This deterministic wireless capability makes the products simple to install and more cost-effective than conduit, delivering a reliable, long-lasting solution.

“Monitoring the optimal temperature and humidity in controlled storage areas is crucial to ensuring optimum product quality—and if this environment is not sufficiently maintained, the stored products can quickly become compromised,” said Chris Dales, senior application engineer, Banner Wireless Division. “The temperature and humidity sensor delivers highly accurate results that are simply transmitted using the integrity-ensured SureCross Wireless Network, and users can select the power method that works best for their individual applications.” Dales adds, “With this arrangement, if temperature or humidity exceed acceptable limits, a remotely located gateway can issue an alarm to management personnel, minimising the risk of product damage or loss.”

Applications

The SureCross Wireless Network equipped with the serial sensor interface and factory-calibrated temperature and humidity sensors deliver dependable monitoring in a broad range of environments, including:

* Large-scale refrigeration and cold chain storage systems.

* Greenhouses.

* Warehouse areas.

* Pharmaceutical.

* HVAC.

* Textiles.

* Energy management.

* IT resources and data centres.

Additional features

Several unique characteristics make the system particularly effective and easy to use:

* Provides relative humidity measurement with ±2% or ±3,5% accuracy (model specific).

* Delivers temperature accuracy of ±0,3°C and resolution of 0,1°C.

* Features a proprietary serial sensor interface optimised for use with FlexPower.

* Offers multiple filter options to meet a wide range of environmental requirements.

* Ensures signal transmission reliability by pairing FHSS technology and TDMA architecture with bidirectional.

For more information contact Rodney Topham, RET Automation, +27 (0)11 453 2468, [email protected], www.retautomation.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Distance sensor for confined spaces
ifm - South Africa Sensors & Transducers
The O6D100 from ifm has been designed as a powerful all-rounder for typical applications in object detection, distance measurement and positioning.

Read more...
Long-range laser distance measuring sensor
Vepac Electronics Sensors & Transducers
The MS-100A is a long-range laser distance measuring sensor with a range of 150 to 1000 mm. This sensor excels in applications requiring extended measurement capabilities, such as quality control and logistics.

Read more...
Listening for damage to wind turbines
Sensors & Transducers
The Fraunhofer Institute for Integrated Circuits, working in concert with the Fraunhofer Institute for Wind Energy Systems, has developed a solution that can be used to identify cracks and breakage inside wind turbine blades remotely at an early stage.

Read more...
Verification using Heartbeat Technology is a breeze
Endress+Hauser South Africa Sensors & Transducers
Heartbeat Technology reflects Endress+Hauser’s long-term commitment to enhancing measurement reliability and efficiency across a growing product portfolio.

Read more...
Enhancing efficiency and reliability in the energy sector
VEGA Controls SA Sensors & Transducers
VEGA offers practical, reliable solutions through specialised measuring instruments and deep industry know-how, all tailored to help energy companies keep costs under control while meeting strict regulatory standards.

Read more...
Condition monitoring for hydroelectric plants
ifm - South Africa Sensors & Transducers
The energy company Compagnia Valdostana delle Acque generates electricity in the region’s 32 hydroelectric power plants with a total capacity of over 900 MW. Vibration sensors from ifm monitor the maintenance requirements of the turbines and power generators at all times.

Read more...
Precision sensing for water treatment
ifm - South Africa Sensors & Transducers
ifm electronic has introduced two next-generation sensors designed for South Africa’s bulk and wastewater sector, engineered to withstand harsh environments and deliver long-term reliability.

Read more...
The next generation of inductive scanning encoder solutions
ATI Systems Editor's Choice Sensors & Transducers
With the launch of the ECI 1122 and EQI 1134 rotary encoders, positioning specialist, HEIDENHAIN has introduced a new benchmark in inductive scanning technology that raises the bar for motion control and precision automation.

Read more...
Next-generation condition monitoring
Sensors & Transducers
The next generation Sitrans MS200 multisensor from Siemens is setting new standards in condition monitoring.

Read more...
Telco sensors for blocked/empty chute detection
Sensors & Transducers
Telco sensors overcome the problems of contaminated environments through powerful high-performance infrared sensors that ensure penetration of harsh pollution and guarantee reliable detectio

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved