Fieldbus & Industrial Networking


PLC allows integration of different brands

March 2001 Fieldbus & Industrial Networking

A precision cutting machine employing servo drives and inverters of one make and a PLC and HMI of another make, totally integrated on a bus system, is now possible.

The LG GM7 open protocol PLC solves the problem. The required bus protocol is easily and simply programmed into the PLC, allowing quick and trouble-free communication. The PLC performs control and analog weighing functions while the Lenze servo controller and inverter drives ensure accurate cutting length, paper feed and stacking functions. The various PLC and servo/drive performance parameters as well as the sheet count value and the mass of the cut-paper stack are displayed on a shared HMI with a touchscreen, allowing setpoint adjustment for all parameters.

The LG GM7 PLC provides 12 bit analog resolution on both input and output signals, ensuring accurate mass control. The PLC can also be expanded to accommodate a maximum of 80 digital I/O.

[email protected]





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A one-stop-shop for industrial communication
Fieldbus & Industrial Networking
HMS Networks has announced that Red Lion and N-Tron are officially product brands. For thousands of automation engineers and system integrators worldwide, this means that scalable industrial solutions for cloud connectivity, edge intelligence, asset management, industrial Ethernet switches, panel meters and operator panels are now available from one trusted source.

Read more...
Cost-effective industrial PoE injector
Vepac Electronics Fieldbus & Industrial Networking
The Edimax IGP-203IT from Vepac Electronics is an industrial PoE injector that not only delivers a cost-effective solution for power distribution, but also allows seamless deployment on an existing LAN infrastructure.

Read more...
Harnessing the power of OT networking
RJ Connect Fieldbus & Industrial Networking
Businesses are increasingly embracing IT/OT convergence to stay ahead and capitalise on advantages such as smarter factories and higher efficiency. This article provides practical insights and guidance to help you navigate these challenges effectively.

Read more...
PC-based control for advanced hydrogen storage technology
Beckhoff Automation Fieldbus & Industrial Networking
Sufficient storage options for renewable energies are essential to use them as efficiently as possible. GKN Hydrogen offers a particularly compact and safe option, low-pressure metal hydride hydrogen storage systems with PC-based control from Beckhoff.

Read more...
Power over Ethernet splitter without electric cabling
Vepac Electronics Fieldbus & Industrial Networking
The GP-101ST Gigabit PoE (Power over Ethernet) Splitter from Vepac Electronics delivers both data and electrical power to non-PoE Fast Ethernet or Gigabit Ethernet-enabled products such as network cameras and wireless access points, using an Ethernet cable, without the need for power outlets and electrical cabling.

Read more...
Beckhoff’s XPlanar boosts productivity in medical device assembly
Beckhoff Automation Fieldbus & Industrial Networking
The intelligent transport system, XPlanar from Beckhoff provided the basis for an innovative system concept allowing the specialists at Automation NTH to reduce the space requirement of an assembly machine for medical diagnostic devices by a factor of 10.

Read more...
Comprehensive solutions for the food and beverage sector
RS South Africa Fieldbus & Industrial Networking
RS South Africa is reinforcing its commitment to the country’s dynamic food and beverage sector, backed by a comprehensive portfolio of over 800 000 products, extensive technical expertise and end-to-end service capabilities.

Read more...
Case History 198: Cascade control overcomes valve problems
Michael Brown Control Engineering Fieldbus & Industrial Networking
A large petrochemical refinery asked me to perform an audit on several critical base layer control loops. This article deals with a problem found on a valve controlling the flow of fuel to a heat exchanger.

Read more...
Improved networking technology for fire and gas detection
Omniflex Remote Monitoring Specialists Fieldbus & Industrial Networking
Critical alarm and event management technology supplier, Omniflex has worked with the South African Nuclear Energy Corporation to upgrade equipment providing digital and analogue signals for its safety critical fire and gas alarm systems.

Read more...
PC-based control for fertiliser
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
On a farm in the USA, valuable ammonia is extracted from slurry and processed into ammonium sulphate. NSI Byosis has transformed this complex process into a flexible modular system. This modular approach requires an automation solution with flexible scalability in both hardware and software, which this Dutch company has found in PC-based control from Beckhoff.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved