Sensors & Transducers


Laser light barriers

May 2008 Sensors & Transducers

The A-LAS series of parallel laser barriers, with homogeneous light distribution in round or rectangular cross-section, is used for measuring, positioning and detection of objects starting from sizes as small as 0,01 mm.

Available from Randburg-based ASSTech Instrumentation, these German manufactured products are of compact design, offering a wide range of apertures from 0,2 mm to 30 mm in a choice of 18 styles.

The measuring principle is based on partial covering of the laser beam which leads to a voltage at the analogue output that is proportional to the degree of covering. The laser light beam emitted by the high precision optical unit allows detection of the smallest objects (eg, threads) even in the case of transmitter to receiver separation distances up to 100 metres, depending on the model and aperture.

The high precision apertures in the transmitters ensure optimum performance in the required application, and guarantee homogeneous light distribution of the beam coupled with sharp focus.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 (0)11 708 9200, [email protected], www.asstech.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Next-generation condition monitoring
Sensors & Transducers
The next generation Sitrans MS200 multisensor from Siemens is setting new standards in condition monitoring.

Read more...
Telco sensors for blocked/empty chute detection
Sensors & Transducers
Telco sensors overcome the problems of contaminated environments through powerful high-performance infrared sensors that ensure penetration of harsh pollution and guarantee reliable detectio

Read more...
Cleaning solutions for optical sensors
Endress+Hauser South Africa Sensors & Transducers
Achieving accurate and continuous process visibility requires reliable sensor performance, even in challenging media. Endress+Hauser’s CYR51 mechanical cleaning unit addresses these challenges by providing stable, automated cleaning of turbidity and UV-Vis absorption sensors.

Read more...
Next-generation gas meter module
Sensors & Transducers
Sensirion has launched its new gas meter module combining a low-power consumption mode, future-ready compatibility and seamless integration, all within the same compact form factor.

Read more...
Adjustable proximity sensor with five metre range
Gail Norton Instrumentation Sensors & Transducers
The Telco line of photo-electric eyes have the accuracy and reliability you need.

Read more...
Food safety – a matter of weight
Sensors & Transducers
Weighing systems play a key role in ensuring product quality in food production, complying with legal requirements and avoiding product recalls. The Minebea Intec MiNexx portfolio has been specially developed to meet these requirements.

Read more...
Telco sensors in the paper and pulp industry
Gail Norton Instrumentation Sensors & Transducers
The paper and pulp industry poses a major problem for most photoelectric sensors. Telco Sensors has overcome this with its powerful and high-performance photoelectric sensors, ensuring penetration of thick and harsh pollution while guaranteeing reliable detection.

Read more...
Leaders in sensor technology
Gail Norton Instrumentation Sensors & Transducers
A new addition to the Telco Sensors range is the adjustable Proximity sensor, with a range up to 5 metres.

Read more...
Cutting-edge sensor technology
Endress+Hauser South Africa Sensors & Transducers
The advantage of Endress+Hauser’s Memosens technology is that digitised measured values and sensor information are transmitted via a non-contact connection from the sensor to the cable, and as a digital signal to the transmitter.

Read more...
Miniature inductive sensors
ifm - South Africa Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved