Fieldbus & Industrial Networking


Proxies link Interbus to Profinet

July 2007 Fieldbus & Industrial Networking

Built on the Industrial Ethernet ASIC, Ertec 400 (enhanced Realtime Ethernet controller) developed for Profinet-IRT, there are now two powerful Interbus proxies from Phoenix Contact. They differ only in the construction of the Interbus master: The FL NP PND-4TX IB uses copper wiring for the Interbus system. The FL NP PND-4TX IB-LK employs fibre-optic cabling.

All Interbus diagnostic functions, down to the individual circuit diagnostics, are mapped to Profinet mechanisms and 500-kilobaud and 2-megabaud systems can be connected. Profinet supports update rates as fast as 1 ms. This means that the proxy can be used when migrating applications to Profinet, making it possible to integrate anything from small Interbus segments to complete networks.

Both proxy devices combine the Interbus master with a four-port control cabinet switch which obviates the need for additional switching devices at the installation location. Several proxies can, for example, be switched together in a row. The proxy supports all protocols and functions required for Profinet, including the Lower Link Layer Discovery Protocol (LLDP) for obtaining topology information from the network. Both proxies therefore offer consistent, vertical integration of Interbus into any given Profinet-capable control system.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

A one-stop-shop for industrial
Fieldbus & Industrial Networking
HMS Networks has announced that Red Lion and N-Tron are officially product brands. For thousands of automation engineers and system integrators worldwide, this means that scalable industrial solutions for cloud connectivity, edge intelligence, asset management, industrial Ethernet switches, panel meters and operator panels are now available from one trusted source.

Read more...
Power over Ethernet (PoE) injector for seamless deployment
Vepac Electronics Fieldbus & Industrial Networking
The Edimax GP-203IT from Vepac Electronics is a Power over Ethernet injector that not only delivers a cost-effective solution for power distribution, but also enables seamless deployment on the existing LAN infrastructure.

Read more...
A one-stop-shop for industrial communication
Fieldbus & Industrial Networking
HMS Networks has announced that Red Lion and N-Tron are officially product brands. For thousands of automation engineers and system integrators worldwide, this means that scalable industrial solutions for cloud connectivity, edge intelligence, asset management, industrial Ethernet switches, panel meters and operator panels are now available from one trusted source.

Read more...
Cost-effective industrial PoE injector
Vepac Electronics Fieldbus & Industrial Networking
The Edimax IGP-203IT from Vepac Electronics is an industrial PoE injector that not only delivers a cost-effective solution for power distribution, but also allows seamless deployment on an existing LAN infrastructure.

Read more...
Harnessing the power of OT networking
RJ Connect Fieldbus & Industrial Networking
Businesses are increasingly embracing IT/OT convergence to stay ahead and capitalise on advantages such as smarter factories and higher efficiency. This article provides practical insights and guidance to help you navigate these challenges effectively.

Read more...
PC-based control for advanced hydrogen storage technology
Beckhoff Automation Fieldbus & Industrial Networking
Sufficient storage options for renewable energies are essential to use them as efficiently as possible. GKN Hydrogen offers a particularly compact and safe option, low-pressure metal hydride hydrogen storage systems with PC-based control from Beckhoff.

Read more...
Power over Ethernet splitter without electric cabling
Vepac Electronics Fieldbus & Industrial Networking
The GP-101ST Gigabit PoE (Power over Ethernet) Splitter from Vepac Electronics delivers both data and electrical power to non-PoE Fast Ethernet or Gigabit Ethernet-enabled products such as network cameras and wireless access points, using an Ethernet cable, without the need for power outlets and electrical cabling.

Read more...
Beckhoff’s XPlanar boosts productivity in medical device assembly
Beckhoff Automation Fieldbus & Industrial Networking
The intelligent transport system, XPlanar from Beckhoff provided the basis for an innovative system concept allowing the specialists at Automation NTH to reduce the space requirement of an assembly machine for medical diagnostic devices by a factor of 10.

Read more...
Comprehensive solutions for the food and beverage sector
RS South Africa Fieldbus & Industrial Networking
RS South Africa is reinforcing its commitment to the country’s dynamic food and beverage sector, backed by a comprehensive portfolio of over 800 000 products, extensive technical expertise and end-to-end service capabilities.

Read more...
Case History 198: Cascade control overcomes valve problems
Michael Brown Control Engineering Fieldbus & Industrial Networking
A large petrochemical refinery asked me to perform an audit on several critical base layer control loops. This article deals with a problem found on a valve controlling the flow of fuel to a heat exchanger.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved