Electrical Power & Protection


Cat 6 patch cable provides surge protection

June 2007 Electrical Power & Protection

DEHN, a leading manufacturer of lightning protection and surge protection systems, has introduced the DEHNpatch patch cable for use in Category 6 installations. The device provides surge protection of all cable pairs and can be used universally according to EN 50173 up to 48 V d.c. DEHNpatch is easy to install and to retrofit as it is simply plugged-in between the patch panel and the active component, such as a switch, instead of a conventional patch cable. Typical applications such as Gigabit Ethernet, ATM or ISDN and VoIP and PoE (Power over Ethernet) can be protected.

With its fully shielded design DEHNpatch can be used in shielded and unshielded networks. Its width is similar to a RJ45 socket allowing up to 24 DEHNpatch devices to be installed in one series and integrated into a 19" rack.

The DIN rail mountable supporting foot with snap-in device provides safe earthing. For single applications, a piece of DIN rail and a fixing device are supplied, while for multiple applications in 19" distribution boards, an optional mounting set is available.

DEHNpatch operates according to the LPZ (lightning protection zone) concept at boundaries 0B - 2 and higher. The device meets IP 20 protection requirements and it has a 1 ns response time. It is supplied with either a 3 m or 5 m cable. Other lengths are available on request.

For more information contact Paul van As, Surgetek, +27 (0)11 792 1303, [email protected], www.surgetek.co.za





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Solar energy reimagined
Electrical Power & Protection
As the global energy sector races to meet net-zero commitments, utility-scale solar is undergoing a fundamental transformation. No longer defined by megawatt capacity alone, solar projects are now being evaluated on their ability to deliver dispatchable power, enhance grid stability, and provide critical ancillary services.

Read more...
Schneider launches new Breaker Status and Communication Module
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its new Breaker Status and Communication Module Modbus SL/ULP, which delivers enhanced performance, improved connectivity and simplified integration for power distribution systems.

Read more...
Battery energy storage is critical to stabilise SA’s grid
Electrical Power & Protection
As the global energy transition accelerates, South Africa is quietly becoming a major player in one of the sector’s fastest-growing energy segments: battery energy storage systems.

Read more...
Reliable redundancy with the Mibbo
Conical Technologies Electrical Power & Protection
In industrial automation and control systems, uninterrupted power isn’t a luxury, it’s essential. The Mibbo M3DN Series Redundant Module steps in as the perfect solution when you need reliable 24 V DC power without the risk of single-point failure

Read more...
Rugged, industrial-Grade DIN rail
Conical Technologies Electrical Power & Protection
The Mibbo MTR960W from Conical Technologies is a high-powered, compact and reliable industrial power supply. It delivers a solid 960 watts of output power at 24 or 48?V DC, and is reliable and cost-effective.

Read more...
Schneider Electric’s microgrid enables optimised energy operations
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its EcoStruxure Microgrid Flex product.

Read more...
Energy management pays off
Electrical Power & Protection
Onsite energy utilities such as boilers must be independently managed to achieve meaningful performance outcomes.

Read more...
Integration of power and energy management with industrial
Schneider Electric South Africa Electrical Power & Protection
Water and power management form the backbone of society and the country’s industrial landscape. With infrastructure challenges, stricter environmental regulations and the need for greater operational efficiency, water and wastewater operators need to optimise their systems. This is where the integration of power and energy management and industrial automation can alleviate some of these operational challenges.

Read more...
Maintenance and health of battery storage systems
Comtest Electrical Power & Protection
How to maintain batteries.

Read more...
Software for designing high-tech
Electrical Power & Protection
Siemens Digital Industries Software has announced that Arc Boat Company (Arc), a startup on a mission to electrify the marine industry, has adopted the Siemens Xcelerator portfolio of industry software to design and manufacture their high-performance, fully electric boats.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved