Sensors & Transducers


New addition to laser distance sensor series

March 2007 Sensors & Transducers

Baumer has added a new member to the Series 13 laser distance sensors, which measure up to 550 mm. The OADM 13 laser distance sensor features a compact design (13,4 x 40 x 48,2 mm) and excellent technical specifications, and ideally complements the existing OADM 12 (measuring distances up to 120 mm) and OADM 20 (measuring distances up to 1 m) sensors.

The triangulation principle, combined with precision optics and intelligent software permits resolutions up to 10 μm at a measuring rate of 900 μs. Two sensor types for measuring ranges of 300 mm and 500 mm are available. A dot or line-shaped laser beam can be selected, depending on your specific requirements. The measuring range can be easily adapted to the necessary measuring conditions by using the 2-point teach-in process standardised by Baumer Electric. This allows the resolution to be optimised and the full signal deviation (4-20 mA or 0-10 V) can be applied to the new measuring range.

The sensor can be used to directly monitor the production process even under restricted space conditions because of its compact design.

For more information contact Andy Brown, Temperature Controls, +27 (0)11 791 6000, [email protected]



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Next-generation condition monitoring
Sensors & Transducers
The next generation Sitrans MS200 multisensor from Siemens is setting new standards in condition monitoring.

Read more...
Telco sensors for blocked/empty chute detection
Sensors & Transducers
Telco sensors overcome the problems of contaminated environments through powerful high-performance infrared sensors that ensure penetration of harsh pollution and guarantee reliable detectio

Read more...
Cleaning solutions for optical sensors
Endress+Hauser South Africa Sensors & Transducers
Achieving accurate and continuous process visibility requires reliable sensor performance, even in challenging media. Endress+Hauser’s CYR51 mechanical cleaning unit addresses these challenges by providing stable, automated cleaning of turbidity and UV-Vis absorption sensors.

Read more...
Next-generation gas meter module
Sensors & Transducers
Sensirion has launched its new gas meter module combining a low-power consumption mode, future-ready compatibility and seamless integration, all within the same compact form factor.

Read more...
Adjustable proximity sensor with five metre range
Gail Norton Instrumentation Sensors & Transducers
The Telco line of photo-electric eyes have the accuracy and reliability you need.

Read more...
Food safety – a matter of weight
Sensors & Transducers
Weighing systems play a key role in ensuring product quality in food production, complying with legal requirements and avoiding product recalls. The Minebea Intec MiNexx portfolio has been specially developed to meet these requirements.

Read more...
Telco sensors in the paper and pulp industry
Gail Norton Instrumentation Sensors & Transducers
The paper and pulp industry poses a major problem for most photoelectric sensors. Telco Sensors has overcome this with its powerful and high-performance photoelectric sensors, ensuring penetration of thick and harsh pollution while guaranteeing reliable detection.

Read more...
Leaders in sensor technology
Gail Norton Instrumentation Sensors & Transducers
A new addition to the Telco Sensors range is the adjustable Proximity sensor, with a range up to 5 metres.

Read more...
Cutting-edge sensor technology
Endress+Hauser South Africa Sensors & Transducers
The advantage of Endress+Hauser’s Memosens technology is that digitised measured values and sensor information are transmitted via a non-contact connection from the sensor to the cable, and as a digital signal to the transmitter.

Read more...
Miniature inductive sensors
ifm - South Africa Sensors & Transducers
The inductive IY/IZ type sensors from ifm are used in various industrial areas where space is limited.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved