The precision pressure switch, PINTER, type Manocomb can now also be supplied with an integral independent pressure transmitter. This results in a unit with the well known accuracy for switching, a unit with actual value indication and a unit giving a 4-20 mA output signal.
The pressure switch unit retains its unique characteristic in that the set-point scale, which is calibrated in the required engineering units, is accurate to within 1%. Adjustment of the set-point is by a thumb wheel without any additional calibration equipment. A change in set-point can be performed while the pressure switch is in operation ie, on line. The adjusted set point is visible through the sturdy transparent macrolon cover. The Manocomb makes the calibration and set-up of a pressure switch with a dead weight tester a thing of the past.
On the TM unit one set-point allows for high or low switch point settings. The repeatability of switching is 0,03% or better. Optionally the instrument may be supplied with an actual value indicator. This would save the cost of purchasing and installing an additional pressure gauge. The transmitter is loop powered by a 14-28 V d.c. supply.
The Manocomb is wall-mounted, robust and has an environmental protection rating of IP 65. The important aspect of keeping production targets up and running costs down, is addressed by the long term saving on set-up time, no down time and no recalibration costs. Mecosa is the sole representative for PINTER in South Africa.
Multiphase level measurement Mecosa
Level Measurement & Control
The measurement of more than two phases or of interfaces that are not clearly defined poses a number of challenges for measurement technology. Radiation-based measuring systems such as Berthold‘s EmulsionSENS master these problems.
Read more...Multi-touch panel generation in a smart design Beckhoff Automation
Operator Interfaces, Switches & Relays
Following over 25 years of successful in-house panel production and 12 years of expertise in multi-touch design, Beckhoff is bringing out a new smart panel design, the Next multi-touch panel generation.
Read more...Simple, powerful illumination
Operator Interfaces, Switches & Relays
In applications needing quick, clear communication, the GS60 Pro Multicolour Guide Spotlight delivers powerful, easily configurable illumination and indication to reduce errors and improve productivity.
Read more...Status display for conveying sensor, machine and device data Turck Banner Southern Africa
Operator Interfaces, Switches & Relays
Enhance application accuracy and efficiency with the SD50 Status Display, which conveys sensor, machine and device data via text and multicolour LEDs.
Read more...High performance, low complexity managed switches Industrial Automation & Control (IAC)
Operator Interfaces, Switches & Relays
LEMUR Lite managed switches from Hirschmann deliver full Gigabit Ethernet and PoE/PoE+ support up to 180 W in a cost-optimised, compact design.
Read more...Managed switches for seamless IT/OT convergence Industrial Automation & Control (IAC)
Operator Interfaces, Switches & Relays
Hirschmann IT MAMMUTHUS managed switches enable seamless IT/OT convergence, providing robust security, high scalability and easy network management for industrial environments.
Read more...Inline particle measurement Mecosa
Maintenance, Test & Measurement, Calibration
Part of the SOPAT family, Parsum has for more than 20 years stood for the measurement of particles in a running process - without sampling and without a laboratory.
Read more...Inline analysis measurement technology Mecosa
Maintenance, Test & Measurement, Calibration
SOPAT develops and sells a photo-optical and image-based inline analysis measurement technology that quantitatively characterises particulate multi-phase systems. The software provides real-time analysis of particle size distribution.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version