Remote I/O solution enables Modbus system integration

August 2006 Fieldbus & Industrial Networking Training & Education

When a user wishes to use scada/PLC/DCS hardware as a complete remote input/output (I/O) solution, Advantech's Adam-4000 Modbus series provides a solution. The range includes analog inputs, thermocouple inputs, RTD inputs, analog outputs, digital I/O, and relay output modules provide the solution.

The total Modbus I/O series supports Modbus/RTU protocol as the remote data transmission mechanism, providing easy-integration to any controller bearing Modbus/RTU standard. In addition to Modbus network support these Adam-4000 modules also feature a robust and intelligent design of system diagnostic function and safety setting capability, offering users an easy-to-use, cost-effective remote monitoring and control system.

With built-in Modbus/RTU protocol, the Adam-4000 Modbus I/O is endowed with easy plug-in system integration capabilities. Aside from effortless integration with controllers carrying Modbus/RTU standard, the Adam-4572 can upgrade the Adam-4000 I/O modules to the Modbus/TCP Ethernet layer. Moreover, most HMI software is bundled with Modbus driver and can access the Adam-4000 I/O directly.

Unlike other Adam I/O modules, the Adam-4000 Modbus I/O proves itself more robust and reliable by providing multitype signal input and diverse signal range settings. It offers users a self-diagnostic design with a burnt-out detection function when problems with wire openings occur. These functionalities enable system reliability in environmental monitoring, power scada monitoring, and factory automation markets.

Advantech is represented locally by ProMicro.

For more information contact Elton Prytz, ProMicro, +27 (0) 11 706 7913, [email protected]

Further reading:

Introduction to Part 2 loop signatures and process transfer functions
Fieldbus & Industrial Networking
The previous series of loop signature articles dealt with the basics of control loop optimisation, and concentrated on troubleshooting and ‘SWAG’ tuning of simple processes. In this new series, consideration will be given to dealing practically with more difficult issues like interactive processes, and with processes with much more complex dynamics.

Read more...

---

Siemens sets new standards in drive technology
Fieldbus & Industrial Networking
Siemens is setting new standards in industrial drive technology with the launch of its new high-performance drive system, Sinamics S220. This offers a seamless and innovative drive system with comprehensive simulation and analysis capabilities and advanced connectivity features that enable full integration into digital work processes.

Read more...

---

PC-based control in the plastics industry
Beckhoff Automation Fieldbus & Industrial Networking
Nissei Plastic, an injection moulding machine manufacturer based in Japan is implementing a worldwide tend towards open automation systems from experienced specialists using PC and EtherCAT-based control technology from Beckhoff.

Read more...

---

Loop Signature 31: Non-linearity in control loops (Part 2)
Michael Brown Control Engineering Fieldbus & Industrial Networking
This article is a continuation of Loop Signature 30 published in the last issue in this series, exploring reasons for non-linearities which may be encountered in feedback control loops

Read more...

---

The HR Trap
Security Services & Risk Management Training & Education
When human resources becomes a risk factor. Andre du Venage examines why your CCTV security and other technology risks are covered, but human resources are often overlooked.

Read more...

---

PC-based control optimises robotic parts handling on plastics machinery
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
NEO is a cartesian robot developed by INAUTOM Robótica in Portugal for parts removal on plastics machinery. Its aim is to increase system productivity. NAUTOM Robótica has entered into a strategic partnership with Bresimar Automação to increase the working speed of the cartesian robots using advanced control and motion solutions from Beckhoff. The result is a comprehensive, future-proof automation solution for its entire family of cartesian robots.

Read more...

---

PC-based control for flat wire motors for electric vehicles
Beckhoff Automation Fieldbus & Industrial Networking
Special machine manufacturer, ruhlamat Huarui Automation Technologies unveiled the second generation of its mass production line for flexible stators with bar winding. This enables extremely short production cycle and line changeover times, supported by PC- and EtherCAT-based control technology from Beckhoff.

Read more...

---

Case History 200: The final case history – desuperheater control problem.
Michael Brown Control Engineering Editor's Choice Fieldbus & Industrial Networking
For this final article I have chosen to relate a problem that existed in a desuperheater temperature control on a boiler in a petrochemical refinery.

Read more...

---

PC-based control technology in additive manufacturing
Beckhoff Automation Editor's Choice Fieldbus & Industrial Networking
As an open control platform, PC-based control supports different engineering approaches, including low-code programming. The machine builder, Additive Industries uses this to create the code for the TwinCAT runtime of its 3D printers.

Read more...

---

Suppression and safety solutions for fire and gas in mission-critical industries
Fieldbus & Industrial Networking
By representing world-leading brands and focusing on fully integrated, certified systems, HMA South Africa is positioning itself as a trusted partner in fire detection, suppression and explosion-proof safety solutions across the continent.

Read more...

---