New HVAC VSD launched

May 2006 Motion Control & Drives

LS Industrial Systems is offering its iP5A series of HVAC variable speed drives. The range is specifically designed to cater for building airconditioning systems and centrifugal pump installations, incorporating Metasys and other HVAC orientated protocols. A fan/pump speed reduction of 20% requires only 64% of the full speed load. Similarly, a fan speed reduction of 30% will require only 49% of the rated full speed load.

This square law characteristic makes the use of the standard VSDs uneconomical, as their output stages are designed to handle high overload currents. With the output stage typified for HVAC applications, a significant reduction in drive cost has been made possible. The new LS iP5A range includes all the sought-after protection including short-circuit proofing earth-leakage proofing (on the run), plastic coated circuit boards, etc.

Features such as multimotor control, enable the drive to control a pump station of up to five pumps, using analog level or pressure control, without the requirement of a PLC for pump switching and sequencing. Full PID control is a standard function, with either a local or a remote set-point value. As with all LS Industrial equipment, the iP5A range has been designed for a MTBF of 200 000 hours.

For more information contact Clive, Ana-Digi Systems, 011 658 1337, [email protected], www.anadigi.co.za

Further reading:

Novel bearing steel next generation of aeroengines
SKF South Africa Motion Control & Drives
SKF continues to re-imagine intelligent and clean rotation with the development of an innovative temperature-resistant, corrosion-tolerant steel called ARCTIC15 designed for aeroengine bearings.

Read more...

---

Products from maxon
Motion Control & Drives
A wide range of new products is available from motion control specialist, maxon. with a diverse technology portfolio ranging from highly integrated robotic actuators to powerful servo drives and controllers.

Read more...

---

Actuators for precise hexapod movements
Motion Control & Drives
Aerotech, manufacturer of high-performance motion control and automation systems, is expanding its Automation1 platform. These compact hexapod devices enable the complete integration of six-axis motion systems into existing control

Read more...

---

SEW-EURODRIVE service centre transforms future of drive repairs
SEW-EURODRIVE Motion Control & Drives
In a momentous step for the local industrial gearbox and drives market, SEW-EURODRIVE South Africa has formally opened a new service and repair facility alongside its headquarters in Aeroton,

Read more...

---

Strategic system upgrades beat mining obsolescence and drive productivity
Motion Control & Drives
Mining operations are under constant pressure to maintain output while controlling costs. One persistent challenge continues to confront the industry, knowing when and how to upgrade aging systems before they become a liability.

Read more...

---

Precision meets performance: The ELGD Axes Family from Festo
Festo South Africa Motion Control & Drives
Festo has introduced the ELGD axes family, engineered for the demands of future-focused industries. With cutting-edge guide technology, exceptional rigidity and high load capacity, these axes deliver more performance within the same installation footprint.

Read more...

---

Condition monitoring in hazardous areas
SKF South Africa Motion Control & Drives
SKF is further strengthening its condition monitoring offer portfolio by a newly developed hazardous area version of its Microlog Analyzer dBX portable vibration analyser.

Read more...

---

Rip-and-ship solution speeds up nuclear decommissioning project
Motion Control & Drives
When removing steam generators from decommissioned nuclear reactor buildings, the most economical method is to remove them in one piece. Mammoet was commissioned by Framatome to support with the removal of four steam generators from PreussenElektra’s Nuclear Power Plant Unterweser in Germany.

Read more...

---

WearCheck turns the focus on friction modifiers
Wearcheck Motion Control & Drives
One of the most important features of a lubricant is the reduction of friction between two surfaces.A dditives like friction modifiers are added to perform this function. Wearcheck turns the focus on friction modifiers

Read more...

---

SEW-EURODRIVE transforms drivetrain uptime
SEW-EURODRIVE Editor's Choice Motion Control & Drives
The DriveRadar IoT Suite from SEW-Eurodrive is an ideal solution for industrial condition monitoring. This powerful ecosystem of intelligent sensors, edge devices and cloud-based analytics ensures that customers have full visibility and control of their operations.

Read more...

---