Maintenance, Test & Measurement, Calibration


Accurate gas emissions monitor

December 2000 Maintenance, Test & Measurement, Calibration

The Oldham E6200 is a continuous stack gas monitor that features accurate measurement with automatic zero and span check, no drift, low maintenance requirements, instantaneous reading of up to six gases from a list of many: CO, CO2, SO2, Nox, NH3, HCl, CH4 HC O2, etc.

There are selectable ranges for ppm and % volume measurement. Optional measurement of H20, temperature and flow is also available. The E6200 readings are in situ, thereby maintaining accuracy and instantaneous response.

Accuracy is ±2% full scale and readings are linear, eliminating requirement for lengthy and expensive isokinetic calibration sampling.

There is also no requirement for expensive reference gases and the instrument is able to operate in stack temperatures in excess of 500°C.

Standard outputs include 4-20 mA, 0-5 V d.c., RS232 and relay. The IP65 rated enclosure allows adequate protection against the elements, and the unit is in full compliance with EPA regulations.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

All-in-one documenting process calibrators
Comtest Maintenance, Test & Measurement, Calibration
The multifunction calibrators perform sourcing, simulation and measurement of pressure, temperature and electrical signals.

Read more...
Five reasons for force measurement
WIKA Instruments Editor's Choice Maintenance, Test & Measurement, Calibration
Wika takes a closer look at the measured variable of force and gives five reasons to show why force measurement is of particular importance.

Read more...
High-quality contact lubricants
Vepac Electronics Maintenance, Test & Measurement, Calibration
CG53A is part of the CG series of contact lubricants, designed as an extension of the extremely popular 2X range. The main advantages of these products are reduced contact resistance, even on extremely ...

Read more...
Field services – beyond break-fix to invaluable organisational insight
Schneider Electric South Africa Maintenance, Test & Measurement, Calibration
An outsourced field services team can assist organisations not only during emergencies but also by providing spares, technical support and 24/7 callout availability.

Read more...
Pyranometer for monitoring small-scale PV installation efficiency
GHM Messtechnik SA Electrical Power & Protection Maintenance, Test & Measurement, Calibration
The device’s classification level under the ISO 9060:2018 standard guarantees accuracy, reliability, precision and compliance with reference standards.

Read more...
Condition monitoring on offshore oil platforms
Beckhoff Automation Maintenance, Test & Measurement, Calibration
The steel structures of an offshore platform are exposed to extreme environmental conditions throughout their entire service lives. Difficult sea conditions ranging up to freak waves and aggressive ...

Read more...
The ‘P’ in predictive maintenance represents progress, not pain
SMC Corporation South Africa Maintenance, Test & Measurement, Calibration
There are three main types of maintenance: reactive, preventative and predictive. But how do you make sense of these terms? Human health can provide an analogy to machine health. Take diabetes, for ...

Read more...
Precision current loop calibrators
Comtest Maintenance, Test & Measurement, Calibration
The Fluke 709 and 709H mA loop calibrators are built around a user-friendly interface with a quick-set rotary encoder knob.

Read more...
Why calibrating multipoint thermocouples is so challenging
WIKA Instruments Maintenance, Test & Measurement, Calibration
Multipoint thermocouples monitor temperature cycles extremely accurately, even at 1000°C or higher, necessitating traceable calibration in accordance with DIN EN ISO/IEC 17025 specifications.

Read more...
Hydraulic deadweight tester for pressure instrument calibration
Instrotech Pressure Measurement & Control Maintenance, Test & Measurement, Calibration
The high-quality piston/cylinder units are manufactured from tungsten carbide, which is known for its low thermal coefficient of expansion.

Read more...