The ELR W3/9-500 MM and EMM 3/5-500 MM motor management devices can now be used for motors in Ex areas. Class AK4 according to DIN V19251, Category 3 according to EN954-1 and the EC type examination certificate according to ATEX have been confirmed by the PTB (national metrology institute) under PTB 03 ATEX 3114. A cycle test of the bimetal function is not required. The ability to integrate devices into fieldbus systems such as Interbus and Profibus offers equipment availability at high safety levels, from the motor right through to the process control system.
At only 62 mm wide, the ELR W3/9-500 MM combines an electronic reverse contactor combination with a motor protection trigger and three-phase active output monitoring for installations. The device is suitable for machines of up to approximately 4 kW. The EMM 3/5-500 MM can be used for larger power outputs. Motor management devices protect installations and motors. This is accomplished by the fast active output measurement function, which can monitor a pump for dry-runs or blocked filters, for example. An error triggers an alarm or causes the drive to be switched off, thereby protecting the motor and the installation.
Certified safe power for hazardous industrial environments Conical Technologies
IS & Ex
When working in high-risk environments like oil and gas, petrochemical plants or other hazardous industrial zones, safety isn’t just important, it’s essential. That’s why Traco Power developed the TIB-EX series of DIN rail power supplies, purpose-built to deliver reliable power even in the toughest conditions.
Read more...Parker strengthens explosion safety
IS & Ex
Parker Hannifin has announced that its 37 mm Ex d m coils have attained new ATEX and IECEx Type Examination Certificates according to the latest explosion protection standards.
Read more...Stopping the sparks from flying
IS & Ex
Whenever electrical equipment is required for use in hazardous environments they must be designed with intrinsic safety in mind. Darren Barratt, product sales manager at alarm and event management specialist, Omniflex outlines the importance and key aspects of intrinsic safety design.
Read more...Control and monitoring with only one device Pepperl+Fuchs
IS & Ex
Pepperl+Fuchs has expanded its portfolio of K-System isolated barriers for DIN rail mounting (power rail) with the KCD2-SCS interface module. As the first 2-channel AI/AO intrinsic safety barrier with dual function, the module can be configured individually for analogue input or output control signals.
Read more...Hazardous area solutions Extech Safety Systems
IS & Ex
SEW-EURODRIVE is revolutionising industrial automation with advanced gear units, decentralised drives and the energy-efficient MOVIGEAR system.
Read more...Raptor switches Phoenix Contact
Electrical Power & Protection
The Phoenix Contact Raptor switches enable reliable and safe operation in extreme ambient conditions. The managed switch portfolio meets the stringent requirements of IEC 61850-3 and IEEE 1613 standards and is ideal for critical infrastructure and power supply applications.
Read more...Field service regime key for effective PDS/CPS operation
IS & Ex
While their primary objective is to ensure the safety of people, proximity detection system and collision prevention system installations also have a direct bearing on other critical parameters such as equipment availability and productivity.
Read more...World’s first 5G smartphone for ATEX and IECEx zone 1/21 Extech Safety Systems
IS & Ex
i.safe MOBILE has launched the world’s first 5G smartphone for ATEX and IECEx zone 1/21. The intrinsically safe mobile device, which was also developed for use in 5G campus networks, offers companies great flexibility thanks to its wide range of possible applications, especially in the automation sector.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version