Analytical Instrumentation & Environmental Monitoring


Dust opacity monitors

July 2005 Analytical Instrumentation & Environmental Monitoring Financial (Industry)

The D-CEM2100 opacity monitor (top) is a dual-pass transmissometer configured for the measurement of opacity and dust concentration within the flue gas. Its unique optical arrangement provides continuous measurements of transmissivity of visible light across the flue in opposite directions, providing an accurate average of the dust loading within the duct, as well as a dynamic assessment of any misalignment errors that may occur due to duct movement.

* Dual-pass transmissometer.

* Auto zero and span check.

* Dynamic misalignment check.

* Normalised reporting.

* Remote data display.

* Data in % opacity, mg/m3, mg/Nm3 dust.

The D-CEM1000/1001 opacity monitors (bottom) consist of a visible light transmitter and receiver arrangement with digital data processing in a local display unit. The monitors can display data in either opacity, extinction or dust density in mg/m3 or normalised dust density in mg/Nm3. The D-CEM1001 possesses four analog outputs for normalisation data; temperature, oxygen, pressure and water vapour.

* Simple installation - high reliability - very low maintenance.

* Proven technology meets legislative requirements.

* Data in % opacity, mg/m3, mg/Nm3 dust.

* Lens contamination minimised by efficient air purging.

* Long source life >5 years.

For more information contact Environmental Process Analytics, 012 661 6528.





Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Banking security is evolving
Secutel Technologies Surveillance Access Control & Identity Management Financial (Industry)
From ATM bombings and branch intrusion attempts to operational risks and response management, financial institutions require more than traditional security measures to protect people, assets, and infrastructure.

Read more...
How SCE approaches sensor selection for critical environments
Specialised Climate Engineering Analytical Instrumentation & Environmental Monitoring
Specifying the right sensor for a critical climate involves far more than matching a datasheet accuracy figure. As an authorised Vaisala HVAC partner, SCE explains how understanding the environment, the measurement purpose and sensor placement determines effective climate control.

Read more...
Changing gas quality calls for smarter combustion control
Analytical Instrumentation & Environmental Monitoring
As South Africa prepares for a transition from declining Mozambican natural gas to a proposed methane-rich bridge, LNG, industrial users can no longer assume a constant Wobbe Index and calorific value. The compact RMG RGQ 5 provides fast, plant-level gas-quality data to support approved burner and engine settings.

Read more...
Getting the chemistry right
Analytical Instrumentation & Environmental Monitoring
Grace’s European production site has relied on analogue compression load cells from Minebea Intec for decades, with the long-proven measurement concept now serving as the reference for new silo projects as the company expands its capacity.

Read more...
Why measurement matters in smelting
Endress+Hauser South Africa Analytical Instrumentation & Environmental Monitoring
South African smelters returning to operation after energy constraints face new demands for tighter control, better visibility and environmental compliance. Endress+Hauser explains how modern measurement technology supports safer, more efficient furnace operation and local beneficiation.

Read more...
Sun tracking with pinpoint precision
Senseca Analytical Instrumentation & Environmental Monitoring
Senseca has introduced the SEMS-2000 solar energy measurement system, a 2-axis solar tracker with pinpoint sun-pointing accuracy that automatically monitors direct, global and diffuse irradiance for unattended outdoor solar installations.

Read more...
Detect procurement fraud before losses escalate
Security Services & Risk Management News & Events Financial (Industry) Editor's Choice
Organisations need to move procurement fraud prevention closer to the point where suspicious activity occurs, rather than relying primarily on investigations after money has already been lost, according to SAS and FACTS Consulting.

Read more...
AI fraud is outrunning banking defences
Security Services & Risk Management Financial (Industry)
South Africans are increasingly being targeted by AI-generated fraudsters who sound just like bank employees. However, many local banks are still struggling with legacy tech, slow change processes, and limited data visibility.

Read more...
AMETEK expands 993X gas analyser series with explosion-proof enclosures
Analytical Instrumentation & Environmental Monitoring
AMETEK Process Instruments has added ATEX and IECEx Zone 1-certified explosion-proof enclosures to its 993X series of gas analysers, enabling reliable installation in Zone 1 hazardous locations where purge gas is unavailable.

Read more...
Why medical device leak testing matters for South Africa's MedTech future
ATEQ South Africa Analytical Instrumentation & Environmental Monitoring
As South Africa works to grow local medical technology manufacturing, non-destructive leak and flow testing is becoming a strategic quality assurance tool, helping manufacturers verify device integrity, meet regulatory requirements and improve production efficiency.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved