Maintenance, Test & Measurement, Calibration


Hazardous area vibration meter

July 2005 Maintenance, Test & Measurement, Calibration

Compact and simple to operate, the Metrix model 5500 portable vibration meter from PREI Instrumentation, is CENELEC intrinsically safe certified, ATEX EEx ia I1C T3. It is suitable for engineering and maintenance personnel to monitor rotating machinery and detect excessive vibration before damage occurs.

The meter responds to velocity vibrations in the range 10 Hz to 1 kHz, and it can be operated in any position. Measurements are obtained simply by holding the probe against the vibrating surface, and the LCD indicator provides a digital reading in mm/sec. Pressing the ON button again will hold the display after the meter is removed from the machine.

A leather carrying case is provided with the unit, and a 250 mm extension probe is available as an optional extra - for measuring in places that are difficult to access.

For more information contact Dave Cox, PREI Instrumentation, 011 448 2172, prei@hixnet.co.za, www.eprei.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The Fluke T6 with FieldSense technology
October 2020, Comtest , Maintenance, Test & Measurement, Calibration
FieldSense technology works by providing a capacitive path from a contact point on the back of the tester and the operator’s hand to earth ground.

Read more...
Preventive maintenance in pulp and paper mills
October 2020, R&C Instrumentation , Maintenance, Test & Measurement, Calibration
The thinking around machine condition monitoring has changed over the years and it is now stated that vibration is the better measurement over temperature, since it gives earlier warning.

Read more...
Leak detection has never been quicker and easier
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
SKF’s TKSU 10 ultrasonic leak detector is able to identify leakages in compressed air and vacuum systems, delivering substantial savings for end-users by reducing inspection time and minimising energy costs.

Read more...
Best practices in measurement
September 2020, Yokogawa South Africa , Maintenance, Test & Measurement, Calibration
Operating envelopes are changing and the impact of these changes on instrumentation must not be underestimated. Instrumentation with a design rating of a particular capacity is heavily stressed when the load is increased.

Read more...
Internal inspection of machinery
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
The TKES 10 Endoscope Series from SKF is designed for fast, easy internal inspection of machinery, delivering significant savings in terms of both time and money to customers and end-users.

Read more...
Parker releases new software tool
September 2020, Parker Hannifin - Sales Company South Africa , Maintenance, Test & Measurement, Calibration
IQANgo enables service technicians or machine owners to connect wirelessly to modules in their machines, allowing them to perform a broad range of actions such as system status checks and troubleshooting errors or alarms.

Read more...
Condition monitoring solutions from Turck Banner
September 2020, Turck Banner , Maintenance, Test & Measurement, Calibration
Turck Banner’s retrofit solution can be used in industrial plants that do not yet fully support Industry 4.0 sensor-based condition monitoring. Machines can easily be monitored by customised systems, with data transmitted via wireless networks if required.

Read more...
Detect compressed air, steam, gas and vacuum leaks
September 2020, Comtest , Maintenance, Test & Measurement, Calibration
Comtest has introduced the Fluke ii900, a handheld sonic industrial imager that enables maintenance to quickly locate air, steam, gas and vacuum leaks in compressed air systems. The straightforward, intuitive ...

Read more...
Condition monitoring in the cloud
August 2020, Festo South Africa , Maintenance, Test & Measurement, Calibration
Detecting irregularities at an early stage and initiating the necessary measures before a system failure are now made possible by the dashboards and IoT gateway CPX-IOT from Festo. The turnkey, preconfigured ...

Read more...
The Ratchet P-Clamp reloaded
August 2020 , Maintenance, Test & Measurement, Calibration
When a heavy-duty equipment manufacturer asked HellermannTyton to devise the most effective way to attach and remove cables for additional equipment, nobody imagined that a well-trodden path would lead ...

Read more...