New through-beam sensor series
June 2004
Sensors & Transducers
The new SM 3000 series is a technologically advanced, self-contained photoelectric sensor line that consists of separate transmitter and receiver sensors that are to be used in through beam mode. The sensors are engineered for the automatic door industry, designed to stop doors from closing prematurely, thus preventing injury to passing pedestrians or damage to the doors themselves. The sensor system, with its sensing range of 6 m high light immunity of 50 000 lux, offers optimal performance and reliable detection in demanding applications.
The sensors are housed in a 12,7 mm cylindrical plastic enclosure with a new one-piece snap-in head, which ensures easy and quick installation. The sensor housing is slim, with its length of 30 mm, allowing installation in narrow door profiles. The sensors are designed with a flat sensor lens, which ensures flush mounting to the surface, thus minimising protrusion. They are fully epoxy encapsulated ensuring an IP67 rating.
Control circuitry, electronics and optical components are all integrated into the sensor housings enabling direct connection to a door controller. The system will run off of a 10 to 30 V d.c. supply voltage, providing a transistor output. No external amplifier or controller unit is required. The transmitter and receiver sensors are available with a 5 m cable connection. Both the transmitter and receiver sensors are protected against reverse polarity of power supplies, control input and output signals. The output of the receiver sensor is also protected against short circuit and inductive loads. The transmitter sensor offers a control input wire, which may be used for either disabling or enabling the transmitter power temporarily for test purpose or as a gradual regulation of the transmitting power level.
For more information contact Telco-Gail Norton Instrumentation, 031 701 4861.
Further reading:
Telco sensors in conveyor belt monitoring
Sensors & Transducers
Gail Norton Instrumentation Agencies has developed a low-maintenance conveyor belt monitoring unit built on robust Telco infrared sensors, detecting belt tear and misalignment reliably in harsh coal mining environments.
Read more...
Inductive ring sensors monitor material flow in feeding technology
ifm - South Africa
Sensors & Transducers
ifm’s inductive ring sensors detect metallic parts such as screws and nuts as they pass through tubes at speeds up to 35 m/s, enabling precise counting, flow control and blockage detection, with sensitivity and output functions configurable via IO-Link.
Read more...
Reliable 1D and 2D code reading made simple
SICK Automation Southern Africa
Sensors & Transducers
SICK’s new sensingCam SEC200 image-based code reader brings supermarket-checkout simplicity to logistics and industrial identification, reading 1D and 2D codes reliably with quick browser-based setup, rugged IP65 construction and CRA-compliant cybersecurity.
Read more...
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
printer friendly version