Temperature Measurement


Temperature transmitter offers improved safety

February 2004 Temperature Measurement

Instrumentation specialist Endress+Hauser has extended its range of temperature field transmitters with the introduction of the iTEMP TMT 162 transmitter with HART protocol for converting input signals to an analog, scalable 4...20 mA output signal.

The iTEMP TMT 162 field transmitter is designed to cope with field applications that demand the highest requirements. The transmitter was designed with the particular needs of the petrochemical and oil/gas industries in mind.

Safety was a particular concern and the TMT 162 is explosion-proof and intrinsically safe with certification. In addition to the NAMUR NE 21 for high interference safety and fault conditioning to NAMUR NE 43, the NAMUR NE 89 for recognition of increases in terminal resistance, is complied with. ATEX EX ia, EX d and dust approvals are also adhered to.

The large backlit display, which delivers clear information that can be read under difficult conditions, is a key feature of the transmitter. Set-up is quick and easy and can be carried out online, so there is no need to disconnect the measuring point if re-reprogramming is required.

Stainless steel housing is available as an option, as is two input channels. The dual sensor input enables the TMT 162 to be used for all temperature measuring points, including resistance thermometers, thermocouples, resistance transmitters and voltage transmitters This also allows for significant cost savings in inventory holding. In addition, the two independent sensor inputs offer a redundant 2-channel measurement (backup functionality), or the possibility of mathematic combination of the two channels, such as differential or average calculation.

For more information contact Grant Joyce, Endress+Hauser, 011 262 8000, [email protected], www.za.endress.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Noncontact infrared temperature control in aluminium rolling process
Instrotech Temperature Measurement
The aluminium rolling process is critical to the aluminium manufacturing industry, where precise temperature measurement is essential for ensuring high-quality product output and protecting equipment. The Optris long-wavelength camera can accurately measure strip temperatures in cold rolling and coiling applications.

Read more...
Keeping a close eye on product quality and purity
Endress+Hauser South Africa Sensors & Transducers
Colour measurements are necessary in many processes to avoid product losses and ensure safe production and batching. The Memosens Wave CKI50 process spectrometer from Endress+Hauser is a compact, robust and process-friendly device allowing quality, batching and phase checks to be performed by a single instrument for the entire visible colour spectrum.

Read more...
Where simplicity meets reliability
Endress+Hauser South Africa Temperature Measurement
The new iTEMP TMT31 temperature transmitter from Endress+Hauser combines simplified selection, ordering, installation and operation with the highest reliability and long-term stability in one product.

Read more...
Automating car window defrosters
Temperature Measurement
Window defrosters are vital features in vehicles, particularly in colder climates. The automotive manufacturer seeks an efficient solution to quickly and precisely measure the temperature of the windows, ensuring that the connections, installed cables and wires work correctly and have no defects before the vehicle’s final release.

Read more...
Simple and efficient level measurement in the mining, minerals and metals industries
Endress+Hauser South Africa Editor's Choice Level Measurement & Control
Measuring devices in the mining, minerals and metals industries face the challenge of varying material states and long distances in measurement height. Endress+Hauser’s answer to these challenges is the new Micropilot family.

Read more...
The impact of thermal imaging in steam methane reformers
Temperature Measurement
As global demand for hydrogen, ammonia and fertilisers increases, LAND is empowering steam methane reformer operators to unlock efficiency gains at existing plants to meet ambitious production targets while also safely decarbonising.

Read more...
Proven indicators monitored in three dimensions
ifm - South Africa Temperature Measurement
The VVB30x continuously detects vibrations in three measurement axes and uses them to calculate proven indicators for evaluating machine condition.

Read more...
Digital display electronic sensors
Transducer Technology Temperature Measurement
The Trantech TTED series is a versatile range of digital display sensors designed for high-accuracy measurement of pressure, flow and temperature.

Read more...
Quality process control instrumentation
Instrotech Temperature Measurement
Instrotech is a leading provider of high-quality process control instrumentation and industrial automation solutions that are designed to optimise efficiency, reliability and safety across industries.

Read more...
Three ways to conduct thermal inspections
Comtest Temperature Measurement
There’s no universal solution for all infrared inspections with a Fluke thermal camera, also known as a thermal imager. You need to match your method to the type of equipment you’re inspecting and the level of detail you require.

Read more...