Light curtain for elevators
October 2003
Sensors & Transducers
Telco's new SpaceGuard SG1 is an advanced light curtain series that provides a problem free protection of passing passengers in demanding elevator applications.
A complete system consists of a self-contained, multibeam, infrared transmitter, SGT and a receiver, SGR. Control circuitry, electronics and optical components are all integrated into the detector profiles enabling direct connection to a door controller or lift operator without the need of a separate power supply/controller unit.
Two models are available: a high performance 40 channel model, with 194 cross scanning beams and a cost effective 20 channel model with 94 cross scanning beams, both of which are housed in a sturdy aluminium, slimline, 9,8 mm profile with an active height of 1800 mm, 4 m sensing range, 10-30 V d.c. supply voltage with either an NPN or PNP transistor output. A dense sweeping curtain of cross scanning beams remains until the fully closed position of the elevator car doors, in both static and dynamic installations.
No on-site set-up or adjustment is required. The SG1 series will automatically adjust to its operating conditions and surroundings during and after installation, thus achieving an optimal, uniform performance by automatically compensating for misalignment and contamination during operation.
When the time-out feature is enabled, up to four non-adjacent channels may be ignored if obstructed for 60 s or more. If a time out channel resumes operation, the time-out function will automatically be cancelled 3 s after re-establishment, ensuring safe and reliable operation until the vandalised unit is replaced. A 24 V d.c. PNP alarm output, which is activated in case of system failure or time-out, and IP67 epoxy encapsulation, are optional.
For more information contact Telco Gail Norton Instrumentation, 031 701 4861.
Further reading:
Telco sensors in conveyor belt monitoring
Sensors & Transducers
Gail Norton Instrumentation Agencies has developed a low-maintenance conveyor belt monitoring unit built on robust Telco infrared sensors, detecting belt tear and misalignment reliably in harsh coal mining environments.
Read more...
Inductive ring sensors monitor material flow in feeding technology
ifm - South Africa
Sensors & Transducers
ifm’s inductive ring sensors detect metallic parts such as screws and nuts as they pass through tubes at speeds up to 35 m/s, enabling precise counting, flow control and blockage detection, with sensitivity and output functions configurable via IO-Link.
Read more...
Reliable 1D and 2D code reading made simple
SICK Automation Southern Africa
Sensors & Transducers
SICK’s new sensingCam SEC200 image-based code reader brings supermarket-checkout simplicity to logistics and industrial identification, reading 1D and 2D codes reliably with quick browser-based setup, rugged IP65 construction and CRA-compliant cybersecurity.
Read more...
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
printer friendly version