Vibration measurement now as convenient as temperature measurement

May 2003 Maintenance, Test & Measurement, Calibration

The new IQ Instruments Model 2300 vibration transmitter makes it easy to provide vibration monitoring alongside traditional temperature monitoring on rotating machinery.

The Model 2300 is supplied in a standard KH type thermocouple head with a single stud mounting. This makes it easy to mount anywhere a thermocouple can be mounted. No special training or equipment is necessary.

The output is 4-20 mA, loop powered, in exactly the same way as industry temperature transmitters. Anyone who can fit and wire a thermocouple can now install a vibration transmitter.

The device is a self-contained instrument designed to measure vibration in industrial machinery such as fans, blowers, pumps and compressors. It is a true two-wire loop-powered instrument. When used with other IQ products indication, alarm and trip functions can be provided to form a cost-effective machine protection system.

An internally mounted accelerometer is the primary measuring element, the output of which is amplified and integrated to obtain an output proportional to velocity.

The design ensures correct operation over a wide variation in supply voltage.

Care has been taken to ensure reliable long-term stability and accuracy without the need for periodic maintenance.

The accelerometer and encapsulated electronics are mounted in a robust weatherproof cast aluminium housing with a rating of IP65.

The entire head is mounted at the point of excitation using the locking nut to ensure correct alignment.

The standard version has the accelerometer isolated from ground. The units are thus suitable for use with PLCs and other applications where ground loops may be a problem.

For more information contact IQ Instruments, 011 792 1210, [email protected]

Further reading:

Infrared thermometers for electrical, industrial and HVAC applications
Comtest Maintenance, Test & Measurement, Calibration
: Comtest, distributor of Fluke test and measurement equipment, explains how handheld infrared thermometers are transforming maintenance in electrical, industrial and HVAC environments, with three measurement strategies and a wide range of practical applications.

Read more...

---

Reverse-engineering legacy industrial gearbox parts
Maintenance, Test & Measurement, Calibration
WEG Africa’s turbine workshop uses 3D scanning technology to reverse-engineer components for legacy gearboxes, turbines and compressors, enabling equipment to run for decades after OEM support and spare parts have dried up.

Read more...

---

Unlocking ICCP remote monitoring
Omniflex Remote Monitoring Specialists Maintenance, Test & Measurement, Calibration
Cathodic protection keeps buried and submerged pipelines safe from corrosion, but verifying it traditionally means costly, hazardous manual site visits. Omniflex explains how a retrofit module brings remote monitoring to ageing transformer rectifiers without replacing functional infrastructure.

Read more...

---

Microdieseling – the explosions you never hear
Maintenance, Test & Measurement, Calibration
Microdieseling is a pressure-induced thermal degradation mechanism in which entrained air bubbles are compressed so rapidly that the surrounding oil ignites, producing soot, varnish and sludge. WearCheck explains how it happens, why the damage varies, and how oil analysis detects it.

Read more...

---

Electrostatic spark discharge – when static strikes back
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck technical manager, Steven Lumley explains how static electricity accumulates in modern low-conductivity lubricants, why compact system designs and fine filtration make ESD more likely, and how to recognise the degradation it leaves behind.

Read more...

---

High-speed cameras for crash testing
Horne Technologies Maintenance, Test & Measurement, Calibration
Vision Research has expanded its Phantom C-series with two cameras optimised for crash and safety testing, offering 4 and 8 megapixel sensors rated to 170G, up to 1180 frames per second, and Phantom Academy application training planned for South Africa next year.

Read more...

---

SKF extends remanufacturing expertise to bearing clearance modification
SKF South Africa Maintenance, Test & Measurement, Calibration
Using its clearance modification expertise, SKF helped a mining equipment OEM salvage spherical roller bearing inventory that would otherwise have been scrapped, confirming a new capability within its remanufacturing services and avoiding redundant procurement.

Read more...

---

When maintenance-system compliance starts replacing plant reliability
Wearcheck Maintenance, Test & Measurement, Calibration
WearCheck ARC division manager, Annemie Willer argues that the greatest threat to effective maintenance is no longer a lack of technology, but the gradual replacement of technical judgement by CMMS compliance, leaving no one owning the machine.

Read more...

---

Automatic lubrication systems drive mobile mine machine reliability and uptime
SKF South Africa Maintenance, Test & Measurement, Calibration
SKF’s Lincoln P203 progressive lubrication systems are improving reliability and uptime on mobile machines at a Zambian gold mine, with installation of 45 units completing by October 2026.

Read more...

---

Nitration: the acid you didn’t see coming
Wearcheck Maintenance, Test & Measurement, Calibration
Nitration is as destructive as oxidation in many engines but far less understood. WearCheck technical manager, Steven Lumley explains how nitrogen oxide gases degrade lubricants, why the process is difficult to detect, and what oil analysis can reveal before damage occurs.

Read more...

---