Infrared curtain has 79 crossed beams
April 2003
Sensors & Transducers
The SG 09 light curtain series consists of a self-contained transmitter, SGT and a receiver, SGR, intended for both static and dynamic installations.
This series requires a 12-30 V d.c. supply voltage whilst providing a solid state relay output enabling direct connection to a door operator or lift controller. For installations where only an AC supply is available, a 230 or 115 V a.c. power supply unit may be ordered separately.
The receiver is supplied as standard with two cables: one for power and output and the one for connection to the transmitter. The transmitter has one cable for connection to the receiver. The interconnecting cables between the transmitter and receiver are available with 180° DIN plugs for easy installation, or without plugs for direct connection to a screw terminal.
After installation set-up is required. This is achieved by pressing the 'teach in' button located on the front cover of the receiver unit, or by temporarily shortening two wires within the transmitter cable. This feature ensures that the transmitting power level is adjusted for each individual beam according to the application, thus achieving an optimal excess and hysteresis level. Once adjusted, the system will automatically compensate for moderate contamination, ageing of components and misalignment during operation.
The time out feature will allow up to two non-adjacent channels to be ignored if obstructed for more than 60 seconds. If a timed out light beam resumes operation, the time out function will automatically be cancelled 3 seconds after re-establishment.
There are three individual monitor LEDs on the front of the receiver unit. A green LED for power indication; a yellow for output and a red system status LED.
For more information contact Telco Gail Norton, 031 701 4861.
Further reading:
Telco sensors in conveyor belt monitoring
Sensors & Transducers
Gail Norton Instrumentation Agencies has developed a low-maintenance conveyor belt monitoring unit built on robust Telco infrared sensors, detecting belt tear and misalignment reliably in harsh coal mining environments.
Read more...
Inductive ring sensors monitor material flow in feeding technology
ifm - South Africa
Sensors & Transducers
ifm’s inductive ring sensors detect metallic parts such as screws and nuts as they pass through tubes at speeds up to 35 m/s, enabling precise counting, flow control and blockage detection, with sensitivity and output functions configurable via IO-Link.
Read more...
Reliable 1D and 2D code reading made simple
SICK Automation Southern Africa
Sensors & Transducers
SICK’s new sensingCam SEC200 image-based code reader brings supermarket-checkout simplicity to logistics and industrial identification, reading 1D and 2D codes reliably with quick browser-based setup, rugged IP65 construction and CRA-compliant cybersecurity.
Read more...
Market opportunity for sensors in humanoid robots
Sensors & Transducers
A new IDTechEx report forecasts the market for sensors in humanoid robots will exceed $6,59 billion by 2037, driven by perception sensors, force/torque sensors, encoders and inertial measurement units across a growing range of commercial robot platforms.
Read more...
The wireless route to safer, more efficient mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Modern wireless level measurement technologies are helping mining operations improve process control, increase safety and reduce installation costs. Emerson’s Rosemount 3408 wireless non-contacting radar level transmitter uses 80 GHz frequency-modulated continuous wave radar with HART communication to reach remote assets where cabling is impractical.
Read more...
Telco sensors for harsh environments
Sensors & Transducers
Telco sensors are designed to operate where moisture, particulate contamination and surface fouling would disable conventional sensors, with a range including an adjustable five-metre infrared proximity sensor for harsh industrial environments.
Read more...
The data-driven path to sustainable manufacturing
ifm - South Africa
Editor's Choice Sensors & Transducers
Smart automation is closing the gap between operational efficiency and environmental responsibility, and the data to do it is already inside the plant. With ifm’s sensing and digitalisation technologies, manufacturers can turn machine intelligence into measurable sustainability gains.
Read more...
Expanding visibility in mining operations
Emerson Automation Solutions
Editor's Choice Sensors & Transducers
Advances in wireless communications, condition monitoring and sensing technologies are helping mining operators extend measurement into previously under-monitored areas, improving equipment reliability, process performance and water stewardship.
Read more...
Fiber-optic amplifiers for precise object detection
ifm - South Africa
Sensors & Transducers
The OCF fibre-optic amplifier detects even the smallest or most transparent objects in confined spaces, making proven fibre-optic technology easier and more user-friendly than before.
Read more...
The next era of measurement and instrumentation
Sensors & Transducers
Smart sensors and non-contact radar are reshaping industrial measurement, feeding connected platforms that predict failures before they happen.
Read more...
printer friendly version