Sensors & Transducers


Bromide sensor for water disinfection

February 2019 Sensors & Transducers

With the expansion of its product range of membrane-covered amperometric digital sensors for liquid analysis, ASSTech now has available the Jumo tec-Line Br bromide sensor for general water disinfection applications.

Bromide is a halogen that is exceptionally well-suited for disinfecting aqueous media and is effective against bacteria, viruses and fungi while at the same time removing pollutants in water through oxidation. The disinfection effect is only slightly weaker than with chlorine. Bromide has a high pH tolerance and, in contrast to chlorine, still works very well at pH values around 8.

The new Jumo tecLine Br sensors distinguish themselves through a proven measuring system, easy calibration and integrated temperature compensation. A digital interface allows the new sensor to be integrated into the Jumo digiLine analysis sensor network.

Measurement, dosing and recording devices for bromide can be found in the Jumo Aquis touch S and P controller families as well as the Jumo mTron T automation system. The sensor variant with 4-20 mA can also be connected to the Aquis 500 AS or Jumo dTrans AS02 devices.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 11 708 9200, info@asstech.co.za, www.asstech.co.za


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

IO-Link sensors enable the principles of Industry 4.0
Technews Industry Guide: Industrial Internet of Things & Industry 4.0, ifm - South Africa , Sensors & Transducers
The implementation of Industry 4.0 is, among other things, about creating a digital silhouette of a plant, thus allowing for process optimisation. The essential information is provided by many sensors ...

Read more...
Powerful multicode reader: as simple as a sensor
Technews Industry Guide: Industrial Internet of Things & Industry 4.0, ifm - South Africa , Sensors & Transducers
The new multicode reader from ifm electronic impresses with its 4 x higher resolution for reliable reading results, 10 x faster evaluation time and 10 x faster set-up.    Teach button: one of the sensor’s ...

Read more...
Pressure and temperature in one sensor
July 2019, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
ASSTech’s German sensor manufacturing agency, Wenglor, has succeeded in integrating a temperature element into a pressure measuring cell. This makes it possible for the new weFlux² sensor to simultaneously ...

Read more...
Conductivity sensor with IO-Link
July 2019, Morton Controls , Sensors & Transducers
The ILM-4 conductivity sensor with IO-Link is a big step towards Industry 4.0 in hygienic process technology. It is equipped with both digital and analog interfaces in parallel. Data can therefore be ...

Read more...
All-in-one pressure sensor and wireless node
July 2019, Turck Banner , Sensors & Transducers
One cost-effective and easy-to-deploy device Turck’s all-in-one pressure sensor and wireless node is a compact device consisting of a media isolated pressure sensor, a 900 MHz wireless node, and a battery ...

Read more...
New sensor with wash-down ­features
July 2019, Turck Banner , Sensors & Transducers
Turck is presenting a new Q130WD Uprox sensor with wash-down features. Compliant with the requirements of the food and beverage industry, the rectangular proximity switch offers the highest degrees of ...

Read more...
Smart sensor in flat pack design with IO-Link
July 2019, ifm - South Africa , Sensors & Transducers
The new smart sensor in flat pack design with IO-Link from ifm – South Africa has a compact IQ rectangular housing and is ideal for the limited space found in conveyor technology and factory automation. ...

Read more...
Multi-colour touch sensors with ­IO-Link
June 2019, ifm - South Africa , Sensors & Transducers
The new multi-colour touch sensors from ifm bring flexible adaptation to any application. Where many different sensors were required before, one individually adjustable sensor is sufficient today. The ...

Read more...
Static and rotational torque sensors
June 2019, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
With the new compact 8661 series of torque sensors, Burster has extended its portfolio to include static and rotating torques over the range from 0,05 to 200 Nm. In addition to the highly accurate measurements, ...

Read more...
Handheld control valve tester
June 2019, Comtest , Sensors & Transducers
In the past, control valve testing meant using complicated testers that required extensive training, the removal of the valve, and often one-to-two hours of test time on the bench. Comtest is therefore ...

Read more...