classic | mobile
 

Search...

SA Instrumentation & Control Buyers' Guide

Technews Industry Guide - IIoT 2018

Technews Industry Guide - Maintenance, Reliability & Asset Optimisation

 

Digital conductivity sensor with IO-Link
October 2018, Sensors & Transducers


Jumo digiLine is the bus-compatible connection system for digital sensors in liquid analysis. The digiLine sensors for conductive (CR) and inductive (Ci) measurement of electrolytic conductivity are new to the range, supplied in a unique variant with an IO-Link interface.

The digiLine range allows for operation of up to six digital sensors on the Jumo Aquis touch S (P) transmitter or up to 62 on the mTron T measurement, control and automation system. Both the operation of individual measuring points, as well as the setup of extensive sensor networks, is possible. Automatic integration into the digiLine sensor network with the intelligent plug and play software tool makes start up easy.

The conductivity measurement devices supplement the Jumo digiLine sensor range, which up until now covered measurements for pH, redox, temperature, dissolved oxygen, turbidity, as well as water disinfection variables such as free chlorine.

The applications are universal with versions available for all water qualities, ranging from ultrapure in pharmaceutical applications, to injection (WFI) quality with conductive values from 0.05 μS/cm to measurements in highly concentrated liquids of up to 2000 mS/cm. Tried and tested analog sensors in the hygienic or standard design type are enhanced with Jumo digiLine electronic components to become intelligent smart sensors.

The Cr/Ci sensors are available with integrated electronic components or detached electronic head and cable connection. The detached version can easily master problematic installation situations, such as heat emission or vibration.

An RS-485 interface with extended Modbus protocol serves as the digiLine interface allowing integration into standard Modbus RTU networks. This is one of the first electrolytic conductivity measurement devices to be integrated in machines and plants with IO-Link infrastructure.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 11 708 9200, info@asstech.co.za, www.asstech.co.za


Credit(s)
Supplied By: ASSTech Process Electronics + Instrumentation
Tel: +27 11 708 9200
Fax: +27 11 708 9219
Email: info@asstech.co.za
www: www.asstech.co.za
Share via email     Share via LinkedIn   Print this page

Further reading:

  • Humidity measurement in poultry farms
    December 2018, Instrotech, Sensors & Transducers
    Methods of farming chickens vary from country to country, however the general temperature and humidity conditions required for the three stages of chicken lifecycle are always similar. Temperature and ...
  • Anemometers for accurate wind measurements
    December 2018, GHM Messtechnik SA, Sensors & Transducers
    Delta Ohm, part of the GHM Messtechnik Group of Companies, recently launched a range of anemometers that offer wind speed measurement of superior accuracy and that are particularly suited for installation ...
  • Torque transducers for powertrains
    December 2018, Instrotech, Sensors & Transducers
    Climate change, urban air quality and the rising cost of energy have become the defining issues of the 21st century. With energy consumption and exhaust emissions from vehicles being significant contributors ...
  • Pressure measuring cell with ISP
    December 2018, ASSTech Process Electronics + Instrumentation, Sensors & Transducers
    A new addition to Jumo’s automation products is the Ceros S01 M pressure sensor with integrated signal processing (ISP), which is an active component that delivers a temperature-compensated and calibrated ...
  • Adjustable background suppression sensor
    December 2018, RET Automation Controls, Sensors & Transducers
    Banner Engineering’s newest addition to the popular QS18 Series product family is an electronic adjustable field background suppression sensor with barrel mount. Electronic adjustment provides a more ...
  • Vision sensor for colour inspections
    December 2018, RET Automation Controls, Sensors & Transducers
    Banner Engineering’s iVu series vision sensors are now available in models capable of colour inspections. iVu Colour sensors build on the inspection capabilities offered by other iVu vision sensors by ...
  • Food safety hazards and how to choose sensor solutions
    November 2018, RET Automation Controls, Sensors & Transducers
    This article outlines three of the most common food hazards that can result in recall and describes several sensor technologies that can help ensure food safety in each scenario.
  • Steam turbine control
    November 2018, WIKA Instruments, Sensors & Transducers
    In coal-fired power plants, steam is produced by pumping highly purified water through boiler tubes. The water is heated to a high temperature and pressure, and then flows through several orifices into ...
  • Transducers for traction power ­substations
    November 2018, Mecosa, Sensors & Transducers
    Smooth-running services as well as passenger and employee safety in railway operations depend on functions such as emergency shutdown in the event of short circuits, the detection of delayed potentials ...
  • Yokogawa’s fibre optic heat detector
    November 2018, Yokogawa South Africa, Sensors & Transducers
    Yokogawa has announced the DTSX1 fibre optic heat detector, an OpreXTM Field Instruments heat sensing and fire detection solution. Housed in an enclosure and suitable for use with specified fibre optic ...
  • 3D software eliminates ­programming
    November 2018, ASSTech Process Electronics + Instrumentation, IT in Manufacturing
    More and more industrial users are discovering the potential of three dimensional software-aided object measurement. With the VisionApp 360 software, Wenglor now offers a smart tool that makes 3D object ...
  • Fast image processing with UniVision software
    November 2018, ASSTech Process Electronics + Instrumentation, Sensors & Transducers
    New to sensor specialist ASSTech is Wenglor’s latest software solution to simplify implementation of intelligent image processing applications for the range of weQube smart cameras. Sensors can easily ...

 
 
         
Contact:
Technews Publishing (Pty) Ltd
1st Floor, Stabilitas House
265 Kent Ave, Randburg, 2194
South Africa
Publications by Technews
Dataweek Electronics & Communications Technology
Electronic Buyers Guide (EBG)

Hi-Tech Security Solutions
Hi-Tech Security Business Directory

Motion Control in Southern Africa
Motion Control Buyers’ Guide (MCBG)

South African Instrumentation & Control
South African Instrumentation & Control Buyers’ Guide (IBG)
Other
Terms & conditions of use, including privacy policy
PAIA Manual





 

         
    classic | mobile

Copyright © Technews Publishing (Pty) Ltd. All rights reserved.