Electrical Power & Protection


Vandal-proof mini substations

November 2016 Electrical Power & Protection

Electrical substations pose a number of unique challenges including vandalism and the theft of copper. This is especially true for mini substations, which are often located in residential areas and in remote rural areas, and applies to those owned by power utilities as well as private owners.

While larger substations are often protected using surveillance equipment, this is not always feasible with mini substations and, apart from the unnecessary disruption of electrical services, the damage done to these installations could have potentially lethal consequences for maintenance personnel.

Constructed as a complete unit

Working in collaboration with Eskom, WEG Transformers Africa (WTA), part of the Zest WEG Group, developed a vandal-proof mini substation that is now approved by the power utility.

Andre Mans, chief operating officer of WTA, says that this approval is very important as it confirms the functionality as well as reliability of the vandal proof substations. “This level of approval not only shows that the mini substations meet all the criteria, but also gives absolute assurance to the marketplace,” he adds. “Notably, the mini substations are targeted at both power utilities and private end users.”

The WTA vandal-proof units are ideal for installation in high-risk areas. The entire enclosure, including doors and lock protection facilities, are constructed from 6 mm steel with the doors being specially reinforced and heavy-duty door hinges complement the four-way locking mechanism. The transformer unit is sealed, further protecting the installation.

A major benefit is that the mini substation is constructed as a complete unit and is offloaded on site with its roof in position. This is advantageous to contractors as installation does not necessitate assembly of the unit.

Mans says that orders totalling just over 90 units have been received for the 500 kVA 11/0,42 kV mini substation, which are destined for new residential development areas. The first batch of these was delivered in 2015.

The substations are manufactured at WTA’s Wadeville facility, which underwent a complete modernisation programme over the last two years including streamlining of processes and upgrading of equipment. The facility produces standard distribution, power and special application transformers ranging from 50 kVA to 10 MVA in voltages up to 66 kV with off-load tap switch or on-load tap changers.

For more information contact Kirsten Larkan, Zest WEG Group Africa, +27 (0)11 723 6000, [email protected], www.zestweg.com



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Navigating solar energy adoption
Electrical Power & Protection
Although South Africa’s enhanced solar tax rebate has ended, solar and energy storage solutions remain accessible and achievable. By taking a proactive and strategic approach, businesses can successfully lower their operational costs, mitigate power outages, and secure long-term energy independence.

Read more...
As wind energy gains momentum, lack of grid infrastructure remains a bottleneck
Electrical Power & Protection
Interest in wind energy has gained significant momentum in South Africa, opening up new opportunities for investment. However, lack of grid infrastructure could prove to be a stumbling block in unlocking this potential.

Read more...
Portable appliance tester
Vepac Electronics Electrical Power & Protection
The new appliance tester from Vepac is the ideal tool for testing the safety of electrical appliances in accordance with DGUV regulation 3 and BetrSichV. It enables the precise measurement of protective conductor or touch current using the equivalent leakage current method.

Read more...
Is sustainability enough any more?
Electrical Power & Protection
With the planet’s resources stretched to the brink and no signs of improvement, it is time we look beyond sustainability and explore regenerative thinking and design.

Read more...
A simple guide to understanding the importance of IP ratings
Electrical Power & Protection
When selecting electrical products for industrial, commercial or even domestic use, it is crucial to consider how well they can withstand environmental factors like dust and water. This is where ingress protection (IP) ratings come into play.

Read more...
A milestone in electrical safety
ABB South Africa Electrical Power & Protection
Celebrating a milestone in electrical safety, ABB proudly marks the 100-year anniversary of its revolutionary Miniature Circuit Breaker.

Read more...
The power of water
Editor's Choice Electrical Power & Protection
The Alpenglow Hy4 is the world’s first water-based hydrogen combustion engine, offering a convincing alternative to traditional battery-electric vehicles and established hydrogen fuel cell designs.

Read more...
Optimising purification for green hydrogen production
Parker Hannifin - Sales Company South Africa Editor's Choice Electrical Power & Protection
Parker Hannifin delivers advanced purification and thermal management components that enhance green hydrogen production.

Read more...
A new chapter in geothermal engineering
Editor's Choice Electrical Power & Protection
The town of Geretsried in southern Germany has become a focal point in the global shift toward renewable energy. While the world’s attention often turns to wind turbines and solar panels, a quieter but no less powerful force is at work deep beneath the surface, geothermal energy.

Read more...
Harnessing the ocean with wave energy
Editor's Choice Electrical Power & Protection
Wave energy is emerging as one of the most promising yet underutilised renewable sources. Tapping into the rhythmic, predictable power of ocean waves, this technology offers a clean, reliable alternative to fossil fuels and a valuable complement to wind and solar energy.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved