Maintenance, Test & Measurement, Calibration


Multifunction measuring tool for HVAC applications

October 2016 Maintenance, Test & Measurement, Calibration

French manufacturer Kimo’s latest offering is a new multifunction instrument, the AMI 300, a key measuring tool for all professionals in the HVAC industry.

The unit can measure up to six parameters simultaneously for pressure, temperature (RTD, thermocouple, NTC), humidity, air quality, air velocity and airflow, and tachometry. Some 12 000 values can be stored and then transferred to a PC through wireless communication. The AMI has a large 70 x 50 mm display (with bargraph) which allows quick reading of results and browsing is easy via a joystick on the keypad.

The wireless probes are supplied with a multifunction key to allow measurement and settings. A large choice of probes are available such as vanes with diameters of 14, 70 and 100 mm, high resistance gooseneck-shaped hotwire, CO/CO2, multifunction, high temperature hygrometry, RTD, thermocouple etc.

The interchangeable measuring modules are individually calibrated and are automatically recognised by the instrument via the Smart-plus system. As example, the AMI can be equipped with several pressure measuring modules with different measuring ranges.

For more information contact Anastas Schnippenkotter, ASSTech Process Electronics & Instrumentation, +27 (0)11 708 9200, info@asstech.co.za, www.asstech.co.za



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The Fluke T6 with FieldSense technology
October 2020, Comtest , Maintenance, Test & Measurement, Calibration
FieldSense technology works by providing a capacitive path from a contact point on the back of the tester and the operator’s hand to earth ground.

Read more...
Preventive maintenance in pulp and paper mills
October 2020, R&C Instrumentation , Maintenance, Test & Measurement, Calibration
The thinking around machine condition monitoring has changed over the years and it is now stated that vibration is the better measurement over temperature, since it gives earlier warning.

Read more...
Leak detection has never been quicker and easier
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
SKF’s TKSU 10 ultrasonic leak detector is able to identify leakages in compressed air and vacuum systems, delivering substantial savings for end-users by reducing inspection time and minimising energy costs.

Read more...
Best practices in measurement
September 2020, Yokogawa South Africa , Maintenance, Test & Measurement, Calibration
Operating envelopes are changing and the impact of these changes on instrumentation must not be underestimated. Instrumentation with a design rating of a particular capacity is heavily stressed when the load is increased.

Read more...
Internal inspection of machinery
September 2020, SKF South Africa , Maintenance, Test & Measurement, Calibration
The TKES 10 Endoscope Series from SKF is designed for fast, easy internal inspection of machinery, delivering significant savings in terms of both time and money to customers and end-users.

Read more...
Parker releases new software tool
September 2020, Parker Hannifin - Sales Company South Africa , Maintenance, Test & Measurement, Calibration
IQANgo enables service technicians or machine owners to connect wirelessly to modules in their machines, allowing them to perform a broad range of actions such as system status checks and troubleshooting errors or alarms.

Read more...
Condition monitoring solutions from Turck Banner
September 2020, Turck Banner , Maintenance, Test & Measurement, Calibration
Turck Banner’s retrofit solution can be used in industrial plants that do not yet fully support Industry 4.0 sensor-based condition monitoring. Machines can easily be monitored by customised systems, with data transmitted via wireless networks if required.

Read more...
Detect compressed air, steam, gas and vacuum leaks
September 2020, Comtest , Maintenance, Test & Measurement, Calibration
Comtest has introduced the Fluke ii900, a handheld sonic industrial imager that enables maintenance to quickly locate air, steam, gas and vacuum leaks in compressed air systems. The straightforward, intuitive ...

Read more...
Image processing software with Profinet interface
August 2020, ASSTech Process Electronics + Instrumentation , Sensors & Transducers
ASSTech now offers Wenglor’s image processing software – uniVision – with new features. The latest release, Version 2.2, enables smart cameras and control units to be integrated into controls quickly ...

Read more...
Condition monitoring in the cloud
August 2020, Festo South Africa , Maintenance, Test & Measurement, Calibration
Detecting irregularities at an early stage and initiating the necessary measures before a system failure are now made possible by the dashboards and IoT gateway CPX-IOT from Festo. The turnkey, preconfigured ...

Read more...