In a joint local effort, Omniflex and R&C Instrumentation have developed a complete power monitoring system available on a local network or via the Internet. Nearly every factory, shopping mall, airport, hospital, office or high rise apartment complex has an electrical room providing power distribution throughout the facility. Most of these equipment rooms reside in the basement out of sight and in many cases out of mind, until there is a failure.
The distribution system usually includes high voltage metal-clad switchgear, cast resin transformers, low voltage switchgear and panels. A fault or failure in any one of these components can result in power outages, loss of productivity and even fire or an explosion.
Routine checks of these components normally consist of current and voltage measurements and most recently thermographic ‘snapshots’ of the temperature distribution in the switchgear. These tests are normally done once or twice a year and whilst adequate for some applications do not provide a 24/7 monitoring service.
The solution
The installation of the simple power monitoring system allows all voltage, current and non-contact temperature measurement of critical power services, to be checked and monitored either via a local control room display or via the Internet. This can be expanded to generate user defined alarm points that are transmitted to the cellphones of the required personnel.
High connection temperature, overload, phase imbalance, power factor, voltage and current levels are all available via the system. Even power consumption and costing can be displayed.
The system consists of the Omniflex GPRS module providing the intelligence with its data inputs coming from Raytek’s Mi3 series IR thermometers and a conventional power monitor. The units all communicate on a Modbus network to allow for system expandability. This 24/7 system monitoring critical power supplies can save both plant downtime and labour and ensure peace of mind from a safety perspective.
Decarbonising the energies and chemical industry without the risk Schneider Electric South Africa
Electrical Power & Protection
Schneider Electric argues that decarbonisation in Africa’s energies and chemical industry need not compromise production or profitability. A phased, digitally enabled approach, starting with energy efficiency improvements, can reduce emissions while strengthening competitiveness.
Read more...Modular UPS system with scalable, high-availability architecture
Electrical Power & Protection
Legrand South Africa has launched its fifth-generation TriMOD three-phase modular UPS, available from 10 to 80 kW. The system features hot-swappable modules, multiple input/output configurations, and up to 99% efficiency in Eco Mode, designed for data centres and critical industrial environments.
Read more...Why mining operations need local lightning early warning Senseca
Editor's Choice Electrical Power & Protection
Lightning can develop into a serious mining hazard before the first local strike, leaving crews little time to stop work and reach safety. Local early-warning technology can provide valuable lead time, allowing mines to connect developing storm conditions to defined trigger actions that protect people, explosives and equipment.
Read more...South Africa’s dirtiest fuel is building its most resilient boilers
Electrical Power & Protection
Steinmüller Africa argues that duff coal, the low-grade fines and discards stockpiled over decades, can now underpin reliable, compliant industrial boilers using mature circulating fluidised bed combustion technology, turning a long-standing liability into a phased energy transition pathway.
Read more...Retrofitting for sustainability Schneider Electric South Africa
Electrical Power & Protection
As budgets tighten and sustainability targets increase, retrofit and modernisation strategies are gaining traction across Africa, allowing organisations to upgrade only what limits performance while preserving existing infrastructure and extending asset life.
Read more...USB-Datalogger for voltage 0 to 30 V DC Vepac Electronics
Electrical Power & Protection
The PeakTech 5186 is a data logger for DC voltages from 0 V to 30 V with terminals on the top of the device.
Read more...Pole-top boxes for smarter, more secure electricity networks
Electrical Power & Protection
As South Africa accelerates the rollout of smart prepaid electricity metering, innovative enclosure technology from Power Process Systems is helping utilities improve network security, reduce electricity theft and protect critical electrical infrastructure.
Read more...Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.
Read more...Engineering resilience into Africa’s energy future
Electrical Power & Protection
Zutari’s managing director of water explains how Burundi’s landmark Jiji and Mulembwe hydropower projects demonstrate what resilient, climate-adapted infrastructure delivery looks like – and what this means for Africa’s energy future.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version