Water quality as part of environmental responsibility is a key element to triple bottom line reporting, with water licensee operators needing to provide data for licensing authorities and compliance data for reporting. Omniflex has tackled the challenges for this type of remote monitoring application head-on and in the process overcome a number of key challenges.
* Remote unprotected and unmanned sites.
* Solar powered equipment.
* Vandal proofing.
* Automated operation.
The project required that monitoring systems be installed at key sites, geographically spread over a few hundred square kilometres, to track wastewater outflows to ensure that the mine has a complete view of its discharge and treatment processes over its entire operation. Data collected is shared internally across the enterprise, with processing plants, to a GIS system for open reporting and with the Department of Water Affairs.
Measurements at remote sites
Any analytical measurements required can be incorporated into the system. Typically the following are required:
* Flow rate.
* Totalised flow.
* Dissolved oxygen.
* pH.
* Conductivity.
* Turbidity.
System architecture
All three of the system architectures were required for the client to manage data across the organisation and satisfy their management objectives. Omniflex provides a cost effective adaptable and extensible solution, from single point small system to large corporate enterprise monitoring, allowing the integration of existing equipment and legacy systems and providing the management tools to manage an aggregated view of the enterprise. The labour intensive data capture and collation process has been eliminated and the system enables automated reporting for compliance management and environmental action plan reporting.
Preserving a French heritage landmark Omniflex Remote Monitoring Specialists
Maintenance, Test & Measurement, Calibration
Omniflex supplied a remotely monitored impressed current cathodic protection system for the Perret Tower in Grenoble, a protected French heritage site, combining 24/7 corrosion protection with integrated surge protection against lightning strikes.
Read more...Lessons in long-distance telemetry Omniflex Remote Monitoring Specialists
Industrial Wireless Data Acquisition & Telemetry
Key engineering lessons from decades of deploying wireless telemetry systems in demanding industrial applications, covering network management, power constraints, physical challenges and the value of open, simplified architectures.
Read more...Long-distance signal delivery is critical to rail safety Omniflex Remote Monitoring Specialists
Fieldbus & Industrial Networking
A remote monitoring specialist explains why fibre optic technology is increasingly replacing copper cabling in safety-critical railway signalling systems.
Read more...Omniflex upgrades faulty alarms at cereal manufacturing facility Omniflex Remote Monitoring Specialists
Industrial Wireless
Legacy alarm specialist, Omniflex has delivered a direct retrofit solution for ageing MPAS 90 alarm systems at Kellanova’s Wrexham facility, replacing obsolete units with its SIL-1 rated Omni16R rack-based alarm logic, and Omni-X LED Displays.
Read more...Fire risk assessments are the foundation of a safer workplace
Data Acquisition & Telemetry
Fire safety is often only considered after an incident has occurred. One of the most effective ways for organisations to protect their people, assets and operations is through a professional fire risk assessment.
Read more...No power, no coverage, no problem Omniflex Remote Monitoring Specialists
Industrial Wireless
Remote monitoring expert, Omniflex has delivered a remote monitoring and control solution for an impressed current cathodic protection control system, aiding local authorities in Queensland, Australia in the essential maintenance of roadside culverts.
Read more...Smart ICCP monitoring for safer tank storage Omniflex Remote Monitoring Specialists
Industrial Wireless
Cathodic protection is critical for combatting corrosion in oil and gas infrastructure. Omniflex explores how to manage CP systems in hazardous and hard-to-reach areas.
Read more...When SCADA meets the cloud Omniflex Remote Monitoring Specialists
SCADA/HMI
Engineers are faced with the challenge of unifying legacy SCADA systems with modern, IoT-based data platforms. The trouble is, when hardware from multiple manufacturers and generations are all used in the same system, compatibility becomes an issue
Read more...Safety-critical fibre optic systems in mining Omniflex Remote Monitoring Specialists
Enclosures, Cabling & Connectors
Omniflex highlights the importance of fibre optic technology in in enabling systems in the mining industry to transmit shutdown commands reliably over tens of kilometres and verify that they have been executed.
Read more...The keys to successful nuclear decommissioning Omniflex Remote Monitoring Specialists
Industrial Wireless
Remote monitoring specialist, Omniflex has published its latest sector overview exploring the challenges of maintaining critical alarm visibility and radiation monitoring during nuclear decommissioning.
While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.
printer friendly version