News


From the editor's desk: Turning the tide

Technews Industry Guide: Sustainable Manufacturing 2026 News


Kim Roberts, Editor

Our last few Sustainable Manufacturing guides have tracked the changes in the energy industry in South Africa. This year, I found that the story has moved on still further.

South Africa’s manufacturing sector has been hard on the environment. It was built on coal, chemicals and heavy industry, and accounts for more than 38% of the country’s total energy consumption. Sasol alone is responsible for nearly 15% of national greenhouse gas emissions. Changing this is not easy, but something is shifting. Over the past couple of years, a combination of government policy, commercial self-interest and industry partnerships has set South Africa on a more credible path toward greener industrial production.

The energy arena is different now. Two years ago we were emerging from Stage 6 loadshedding. Now rooftop solar capacity in South Africa has passed 8,3 GW, far more than the combined 2,8 GW installed capacity of the government’s renewable energy programmes. It’s interesting to see what drove this change. The steepest growth came during 2022 and 2023, when the motivation was survival. Loadshedding ended, but the number of solar installations kept climbing, driven by the economics of Eskom tariffs rather than necessity. Once the survival phase was over the economics phase began, and it has become a more sustainable driver.

The same pattern is emerging in the rapid growth of battery energy storage. This is being driven by the need to manage intermittent solar and wind generation, improve grid reliability, reduce dependence on Eskom, and give large energy users greater control over their electricity supply. Eskom’s HEX system in Worcester is Africa’s first utility-scale battery energy storage system, while Globeleq’s Red Sands in the Northern Cape is Africa’s largest standalone system. Then there is SOLA’s Naos-1, based on a new business model where private companies bypass Eskom and the grid altogether. It uses solar together with storage to supply customers like Sasol and Air Liquide directly.

Water is the next bottleneck. Coal-fired power is still our largest electricity source and one of the most water-intensive industrial processes in the country. Even cleaner alternatives such as green hydrogen need water somewhere in the chain. This is the technology aiming to decarbonise the parts of industry that solar cannot reach, such as steel, ammonia and aviation fuel. Our flagship local project is the Coega Green Ammonia development near Gqeberha, led by Hive Hydrogen. This plant is pairing a 1,2 GW electrolyser with 3,6 GW of solar and wind to produce up to 1,2 million tons of green ammonia a year for export.

However, splitting water into hydrogen and oxygen takes a great deal of water, and the sites chosen for their solar and wind resources do not have surplus water. The CSIR’s Hydrogen Valley plan for the west coast addresses this by relying on renewable-powered desalination rather than municipal supplies, a practical solution.

The circular economy is a key part of a sustainable manufacturing strategy, and another emerging area worth watching is waste, where there is an interesting parallel with rooftop solar. South Africa currently recovers around R8,2 billion a year from its waste, against an estimated R36 billion that would be available if recovery rates improved and landfill costs were phased out. The same logic that put panels on factory roofs is starting to play out here, economics.

The government’s Extended Producer Responsibility (EPR) has been mandatory for paper and packaging producers since 2021. It holds companies financially and operationally responsible for the entire lifecycle of their products, particularly during the post-consumer waste stage. This has created more than 24 000 jobs and now supports 47 000 waste pickers. The draft National Waste Management Strategy also aims to divert 40% of waste from landfill within five years and move the country toward a sustainable circular economy. Waste pickers already process the bulk of recycled materials without any policy in place, much as factory owners simply went ahead and put solar on their rooftops. If this takes off for economic reasons, there is no reason why the circular economy could not also see a turning point within the next few years.

These developments happened because the economics changed and industry adapted rather than because South Africa became more environmentally conscious. Today we worry about the water we need to keep the power on and the lost value sitting in our waste. We have made huge progress, but now the problems are different. I am confident that industry will again adapt and rise to the occasion, driven by economics.

Our guide highlights the companies in this industry that are working on these problems. I hope you find their contributions as encouraging as I do.


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

RX Africa and Messe Muenchen India join forces to strengthen business platforms in Africa
RX Africa News
Messe Muenchen India has announced a strategic partnership with RX Africa to strengthen the scale, reach and market impact of its premier co-located trade fairs, analytica Lab Africa and IFAT Africa, ahead of their 2027 editions.

Read more...
John Thompson secures order for bagasse-fired boiler
News
John Thompson, a division of ACTOM, has secured an order for a 320 t/h bagasse-fired boiler for what is set to become the world’s largest greenfield sugar mill development in Indonesia.

Read more...
From the editor's desk: Consistently not stupid
Technews Publishing (SA Instrumentation & Control) News
Over the years I’ve followed Charlie Munger. He’s considered to be one of the greatest investors and thinkers on decision making in the past century, and spent six decades as Warren Buffett’s business ...

Read more...
South Africa’s space balls
Editor's Choice News
South African engineers are preparing to take low-frequency radio astronomy to the Moon with three locally developed B.A.L.L.S. spheres aboard China’s Chang’e-8 mission. This could pave the way for a 55-antenna lunar array and marks another step in the country’s growing space engineering capability.

Read more...
RS South Africa announces 2026 Student Project Fund winners
RS South Africa News
RS South Africa has awarded 13 engineering students with R10?000 worth of products each through its 2026 Student Project Fund, supporting projects spanning renewable energy, robotics, warehouse automation and STEM education.

Read more...
Certified gas meter module
News
Sensirion’s next-generation SGM5304 gas meter module has completed certification to the harmonised EN 17526 standard, simplifying MID approval and speeding customers’ route to market.

Read more...
Trafo Power Solutions expands market share
News
Trafo Power Solutions is expanding its market share in mining, industrial, infrastructure, data centre and renewable energy applications through technical expertise, application-specific engineering and responsive customer support.

Read more...
Engineering solutions to keep coal power plants viable in a renewables-driven grid
News
Steinmüller Africa showcased engineering solutions at Enlit Africa 2026 that let existing coal-fired power stations run efficiently at much lower loads, helping the grid absorb a growing share of variable renewable energy.

Read more...
Trafo Power Solutions returns to Electra Mining Africa
News
Trafo Power Solutions returns to Electra Mining Africa 2026 with a portfolio that has expanded well beyond dry-type transformers into fully engineered electrical power solutions for mining, industrial and infrastructure operations across Africa.

Read more...
SAIMC INSPIRE conference extends abstract submission deadline
SAIMC SAIMC News
Following requests from our sponsors, the SAIMC INSPIRE conference has officially extended the abstract submission deadline to 28 August 2026.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved