Electrical Power & Protection


Digital storage oscilloscope with 12-bit high resolution

I&C February 2026 Electrical Power & Protection


As digital speeds and device complexity continue to increase, signals under test are getting more complex, and engineers are more challenged to isolate anomalies in their devices. Test tools for such applications require wide dynamic range measurements to look at minimal signals in the presence of relatively large amplitudes. The new high-resolution SDS2000X HD series of oscilloscopes from SIGLENT, represented by Comtest, are available in bandwidths of 100, 200 and 350 MHz. They are based on a new 2 GSa/s, 12-bit ADC front end that features an exceptionally low noise floor, providing more signal detail and enabling engineers to obtain more accurate waveform measurements.

The vertical resolution of an oscilloscope refers to the ratio of the highest input signal the oscilloscope can handle to the smallest signal amplitude it can detect. With higher resolution measurements, waveform details become more visible, quantisation noise is reduced, and measurement accuracy improves.

The Siglent SDS2000X HD series is a next-generation oscilloscope featuring a 12-bit ADC and a low-noise front-end, providing 16 times the signal resolution of a traditional 8-bit oscilloscope. The SDS2000X HD series displays signals with greater detail, makes more precise measurements, offers higher voltage offsets, and provides better accuracy than traditional 8-bit oscilloscopes.

The SDS2000X HD series also includes several time-saving features. They include deep memory with a maximum record length of 200 Mpts/ch and display four analogue channels and an optional 16 digital channels for mixed signal analysis. They employ Siglent’s SPO technology with a maximum waveform capture rate of up to 100 000 wfm/s (up to 500 000 wfm/s in Sequence mode), 256-level intensity grading display function, plus a colour temperature display mode.


SDS2000X HD also employs an innovative digital trigger system with high sensitivity and low jitter. The trigger system supports multiple powerful triggering modes, including serial bus triggering. An impressive array of measurement and math capabilities, options for a 25 MHz arbitrary waveform generator and serial decoding are also features of the SDS2000X HD.

The SIGLENT SDS2000X HD 12-bit oscilloscope is ideally suited for power supply designers or systems where accuracy and resolution are critical. It is an ideal solution for these test parameters.

Product: https://tinyurl.com/yj269mfm


Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

Simplifying electrical design compliance
Electrical Power & Protection
Referro Systems highlights how Rockwell Automation’s Global SCCR Tool simplifies short-circuit current rating compliance for complex industrial electrical systems.

Read more...
Engineering resilience into Africa’s energy future
Electrical Power & Protection
Zutari’s managing director of water explains how Burundi’s landmark Jiji and Mulembwe hydropower projects demonstrate what resilient, climate-adapted infrastructure delivery looks like – and what this means for Africa’s energy future.

Read more...
Voltage Tester with LED-Display
Vepac Electronics Electrical Power & Protection
The PeakTech 1094 is a reliable and robust two-pole voltage tester that has been specially developed for the safe and precise measurement of AC and DC voltages in the 12 to 400 V range.

Read more...
Schneider Electric launches circuit breaker for cost-effective LV protection
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its EasyPact CVS C4 moulded case circuit breaker in South Africa, extending the Easy series to 1 600 A and giving consultants, contractors, and end users a cost-effective solution for non-critical low-voltage applications.

Read more...
Schneider Electric launches cost-effective, high-performance LV protection
Schneider Electric South Africa Electrical Power & Protection
Schneider Electric has launched its EasyPact NW air circuit breaker in South Africa, extending its Easy series portfolio with a cost-effective solution for non-critical low-voltage applications in commercial, industrial and residential projects.

Read more...
SF6-free switchgear brings digital intelligence to mining
Schneider Electric South Africa Electrical Power & Protection
Combining pure-air switchgear with embedded digital intelligence helps mines cut greenhouse gas emissions, improve safety and meet sustainability targets while enabling real-time visibility into critical electrical assets.

Read more...
Turning plastic waste into clean hydrogen
Electrical Power & Protection
Researchers have developed a solar-powered process that converts plastic waste into hydrogen and useful industrial chemicals while using spent acid from vehicle batteries. The approach could help create a circular system for dealing with several challenging waste streams at the same time.

Read more...
World’s first to deploy Volvo A30 Electric in a hydropower project
Electrical Power & Protection
Volvo CE delivers the world’s first A30 Electric articulated haulers to a Norwegian hydropower project, marking a major step in the electrification of heavy construction equipment.

Read more...
Geothermal could be the next industrial energy source
Electrical Power & Protection
New developments in geothermal technology are set to change how heat trapped beneath the earth’s surface can contribute to the clean-energy transition.

Read more...
SA port could generate wave energy
Electrical Power & Protection
A feasibility study has identified the potential for an 8,3 MW wave energy power station at the Port of Ngqura in the Eastern Cape, using the port’s existing breakwater infrastructure.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved