Instrotech has on offer three Kobold oval wheel flowmeters that give precise flow measurement for all viscous, non-abrasive clean liquids and can be used in a number of diverse applications, such as measurement of fuel consumption for small aircraft, motor boats and mobile power generators. Applicable media are viscous, non-abrasive, clean liquids like petroleum and other fuels (including diesel), oil and grease, ink and pastes and chemicals.
The low cost, compact stainless steel body of the DOE measures fuel consumption for OEM customers, offering different pulse output options, including one to measure pulsating flow from peristaltic pumps. Temperature measurement enables appropriate electronics to compensate for changing densities of the liquids of up to 1000 cP and the unit is accurate to +1% of readings under reference conditions.
The DON is a high end, positive displacement flowmeter, with two oval geared rotors that measure a constant volume per rotation within a precisely machined measuring chamber. With each rotation, a constant volume of liquid is measured. The rotation of the oval gears is sensed via magnets embedded in the rotors and transmits a high resolution pulse output. This signal can be processed externally via a remote display controller or PLC, or other available accessory options attached to the flowmeters. The DON can be used for liquids with different viscosities of up to 1000 cP and higher on request and is accurate to +0,2% of readings.
DON-H for high pressure features measuring ranges from 0,5 to 40 l/min with a maximum pressure of 400 bar and a maximum temperature of 120°C.
Ultra-compact mass flow meters with advanced transmitters Emerson Automation Solutions
Flow Measurement & Control
Emerson has introduced the Micro Motion G-Series line of Coriolis mass flow and density meters, the most compact dual-tube Coriolis mass flow meters on the market. They offer the same level of quality and reliability as standard designs, but in a much smaller and lighter form factor.
Read more...Pressure sensors for hydrogen applications Instrotech
Pressure Measurement & Control
Keller manufactures isolated piezoresistive pressure sensors. The great advantage of the piezoresistive measuring principle is its high stability.
Read more...Optimisation of alkaline electrolysers Samson Controls
Flow Measurement & Control
his application study relates to the use of a smart meter valve in alkaline electrolysers, and is based on proven experience with one of the biggest hydrogen electrolyser producers in the world. The project proves that the smart meter valve’s added functionality creates an ideal setup in alkaline electrolysers for reducing cost and improving functionality and system performance.
Read more...Preventing spills and improving operational efficiency
Flow Measurement & Control
In an industry where every spill carries a hefty price tag, Point Energy Partners found that the manual and low-tech systems at their saltwater disposal sites were a significant problem.
Read more...Wind turbines with smart sensors Instrotech
Motion Control & Drives
The wind’s usable kinetic energy increases with the wind speed. Wind turbines, therefore, use kinetic energy to generate torque and then rotational movement. The rotor, consisting of three rotor blades, ...
Read more...Infrared camera for condition monitoring and early fire detection Instrotech
Temperature Measurement
The Optris PI 640i thermal imager is the smallest measuring VGA infrared camera, with a body-sized volume of 45 x 56 x 90 mm, and weighing only 269 to 340 g, depending on the lens. It counts among the most compact thermal imaging cameras on the market.
Read more...Accurate flowmeter for oil & gas Endress+Hauser South Africa
Flow Measurement & Control
Promass Q, the high-tech Coriolis flowmeter from Endress+Hauser, is now also available for larger pipe sizes with maximum flow rates between 850 and 2400 tph.
Read more...Pressure monitoring for oil and water tempering machines Instrotech
Pressure Measurement & Control
Temperature plays a significant role in many manufacturing processes. In such cases, a tempering machine is used to maintain the manufacturing process at the desired temperature. Keller supplied PR-21Y piezoresistive pressure transmitters to a client specialising in developing and producing oil and water tempering machines.
Read more...Optimising CIP processes with precision instrumentation Endress+Hauser South Africa
Flow Measurement & Control
Many food and beverage manufacturers encounter challenges with CIP processes that take too long. Have you considered exploring potential solutions to address these issues?
printer friendly version