SAIMC


SAIMC: Pretoria branch

December 2015 SAIMC

Employability of South African Engineers

For the month of October, the committee after some consultation opted to invite Marna Thompson and Bellah Nxumalo from Network Recruitment Agency (NRA www.networkrecruitment.co.za), specialists within the C&I domain, to present on the topic of employability.

Marna Thompson (left) and Bellah Nxumalo receive certificates of appreciation from 
Jurie Weidemann and Petrus Klopper.
Marna Thompson (left) and Bellah Nxumalo receive certificates of appreciation from Jurie Weidemann and Petrus Klopper.

Many interesting statistics were quoted and some that stood out highlighted the fact that electrical engineering was listed number one on the list of scarce/critical skills, but more interesting is that around 42% of engineers have a second qualification related to complementary functions like project or business management.

Also of importance is that more than half of the people surveyed have no plans to leave South Africa and will remain based in the country even while they work abroad, so if your strategy is to wait for competition to thin out you may be disappointed. Also, you may think that you will do better as people retire, however the survey revealed that many engineers when they retire continue to operate as consultants. Only 7% of matriculates have physical science and 22% mathematics higher grade, and more disheartening, only 14% of people who start tertiary study actually graduate. What this means is that C&I engineers will continue to be in demand.

Some of the job types which stand out as being scarce are automation/system integration engineers, engineers with ‘renewables’ experience, people with GGC (mining), drives people, MCC and hardware (system) designers and project managers.

Soft skills requirements deemed critical to employability includes factors such as age (read ‘experience’), flexibility (read ‘willing to travel’) and culture (read ‘attitude’).

Numerous constructive questions were raised from the audience about registration with ECSA (Engineering Council of South Africa), level of standardisation of job profiles, recruitment processes and relocation to other countries. In general terms, in excess of 80% of qualified/experienced people are absorbed relatively quickly into the market, which illustrates the employability of South African engineers both locally and abroad.

The final part of the discussions alluded to the fact that an entity such as SAIMC needs to assist with creation of an online platform where members can post their CVs and supporting documents to create an open channel to prospective employers. It is envisaged that niche service providers such as NRA form part of this initiative and possibly via ECSA roll it out to other engineering disciplines. Some more ground work is needed to ensure that efforts are not duplicated. Another opportunity which exists is to streamline the overall recruitment process and to look at standardising job profiles within our industry. This, along with existing efforts, will go a long way to standardising expectation and roles within C&I, and the convergence with IT. Ultimately this will create a more detailed career path and align the tertiary institutions with requirements from industry.

During the month of September, the Pretoria Branch Committee hosted a Golf day to assist with fund raising which was well attended. A special word of thanks goes out to attendees and also our sponsors without whom the day would not have been possible. Seen here enjoying the day are some of the participants.



Credit(s)



Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

SAIMC Zambia
SAIMC SAIMC News
SAIMC Zambia marked its 21st anniversary with the annual SAIMC Banquet, held on 29 November 2025 at Mukwa Lodge in Kitwe, Zambia.

Read more...
SAIMC: From the office of the COO: Reflections on progress and ambitions for the new year
SAIMC SAIMC
As we greet the possibilities of the new year, we have the chance to reflect on our shared journey, to acknowledge our achievements and to set our sights on new horizons.

Read more...
SAIMC: Durban branch
SAIMC SAIMC
The SAIMC Durban Branch closed off its 2025 technology meetings with an exceptionally well-attended session on selecting and applying signal transducers.

Read more...
SAIMC: Durban year-end dinner
SAIMC SAIMC
The SAIMC Durban branch hosted its much-anticipated annual year-end dinner at the Mount Edgecombe Country Club on 22 November 2025. Durban’s summer weather provided the perfect backdrop for a warm, ...

Read more...
Durban branch
SAIMC
At the Durban branch of the SAIMC held in October, Mitch Naidoo took the attendees on an interesting journey on Asset Health Management: Tracking The Pulse Of Your Plant.

Read more...
From the office of the COO: Aligning people, process and technology for global competitiveness
SAIMC SAIMC
As I reflect on the recent SAIMC User Advisory Conference where we gathered to discuss the future of industrial technology, integration and the evolving role of engineering professionals in South Africa ...

Read more...
SAIMC: Durban branch
SAIMC SAIMC
At the Durban branch of the SAIMC held in October, Mitch Naidoo took the attendees on an interesting journey on Asset Health Management: Tracking The Pulse Of Your Plant.

Read more...
SAIMC: Johannesburg branch
SAIMC SAIMC
The SAIMC Johannesburg Branch technical evening was hosted by Proconics Advanced Solutions. The topic of the session was ‘Turning Big 3D Data into Actionable Engineering Insights – Challenges and Smart Solutions’.

Read more...
SAIMC User Advisory Council Annual Summit 2025
SAIMC SAIMC
October 2025 marked a pivotal moment for the South African automation and manufacturing community as the SAIMC User Advisory Council hosted its first annual summit under the SAIMC banner.

Read more...
SAIMC: Johannesburg
SAIMC
The Johannesburg Branch of the SAIMC hosted a successful Technology Evening on 10 September. The event was well attended and generously sponsored by Phoenix Contact.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved