Energy management system for electrohydrostatic actuation systems
January 2024
Motion Control & Drives
In the machine manufacturing industry, more drive systems are being converted from servo-hydraulic throttle to electrohydrostatic actuation systems (EAS). The four-quadrant capability of the electrohydrostatic pump unit and servo drive used in this technology, in combination with the new Moog energy management system (EMS), allows regenerative power flows generated during braking or pressure relief to be stored and reused.
The Moog EMS, consisting of power supply and energy storage, also supports machine builders in the important goal of reducing the connected load in an EAS-based machine to a fraction of the peak power, compared to the hydraulic equivalent. This is done by using actively or passively operating capacitors and/or kinetic storage.
Applications
Ideal use cases for the Moog EMS are in oscillating applications such as elastic material testing or gas compressors and pressure intensifiers, where very high positive and negative power peaks occur, and low process energies are required. These peak-shaving approaches also make sense for forming presses, injection moulding machines and hexapods. In customer applications in testing and forming technology, the use of the Moog EMS has enabled the maximum power consumption from the power grid to be reduced by a factor of six in some cases.
As from 1 September 2023, Customised Motion Control (CMC) is the exclusive distributor and authorised repair centre for Moog for most of the Africa region. This came about when CMC bought Moog SA as a going concern in a management buyout initiated by Moog as part of a footprint rationalisation.
Further reading:
Mammoet completes major bridge replacement at Amsterdam Centraal Station
Motion Control & Drives
Mammoet completes the second of five major bridge replacements at Amsterdam Centraal Station, transporting steel deck sections by water to keep the station open throughout the works.
Read more...
ndustry expertise drives SEW-EURODRIVE’s Electra Mining Africa presence
Motion Control & Drives
SEW-EURODRIVE will showcase industry-specific drive technology, modernisation services and expanded aftermarket support at Electra Mining Africa 2026, with a focus on lifecycle support and operational optimisation.
Read more...
Next-generation motor management solution
Schneider Electric South Africa
Motion Control & Drives
Schneider Electric has launched its TeSys Tera motor management solution in the West African market, combining advanced motor protection, digital connectivity and real-time diagnostics for manufacturing, mining and water applications.
Read more...
Premium slewing rings from SKF
SKF South Africa
Motion Control & Drives
SKF’s slewing bearing portfolio spans standard and customised designs across a wide range of types and sizes, backed by advanced monitoring, remanufacturing services and application engineering expertise for demanding industrial applications.
Read more...
World’s first fully electric hydrogen fuel cell aircraft engine
Motion Control & Drives
Airbus and MTU Aero Engines are establishing a joint venture to industrialise hydrogen-electric propulsion systems for commercial aviation, combining liquid hydrogen expertise with fuel cell development to support the ZEROe programme’s 2035 target.
Read more...
Monopile handling innovations boost offshore wind farm
Motion Control & Drives
Mammoet’s XXL monopile transport system and new MTC 1600 terminal crane are helping offshore wind developers safely marshal and install ever larger monopile foundations, as demonstrated on Van Oord’s Baltic Power project.
Read more...
Automation without the mega factory
Yaskawa Southern Africa
Motion Control & Drives
Mid-sized South African manufacturers are turning to targeted, low-risk automation to solve specific bottlenecks rather than chasing full factory transformation, helped by retrofit-friendly robotics and advanced simulation software.
Read more...
Duplex worm gears for precision backlash adjustment
Motion Control & Drives
KHK USA has introduced duplex worm gears that allow precise backlash adjustment through simple axial movement of the worm shaft, eliminating the need for gearbox housing alterations during assembly or maintenance.
Read more...
Choosing the right level of protection in modern automation
Motion Control & Drives
Choosing the right ingress protection rating for a motor or drive is less about maximising the number, and more about understanding what the machine will actually face in operation.
Read more...
Osterwalder launches multi-plate, fully electric powder press
Motion Control & Drives
Osterwalder Technology has launched the MPneo 480, a 480 kN fully electric multi-plate powder press with up to six cross-pressing modules. Designed for hard metals, ceramics and advanced engineered materials, the press supports complex geometries and offers optional
Read more...
printer friendly version