Electrical Power & Protection


Going underground for energy storage

Technews Industry Guide: Sustainable Manufacturing 2023 Electrical Power & Protection

The idea of using gravity to store energy is not new. Hydro has been a feature of mature electricity grids for decades. While this may be ideal for large-scale storage, it requires very specific geographies and comes with a huge capital cost.

Gravitricity, an Edinburgh-based green engineering startup, is working to make gravity energy storage (GES) a reality.

GES is in principle remarkably simple. When green energy such as solar or wind is plentiful, use it to haul a massive weight to a predetermined height. When it’s limited, release the load to power a generator with the downward gravitational pull. The sheer mass of a gravity battery’s weight, coupled with its incredibly slow descent, generates a huge amount of torque, allowing the system to deliver maximum power almost instantaneously. Gravitricity claims its system can operate for up to 50 years and store energy at half the cost of lithium-ion batteries. Commercial director, Robin Lane says that this technology can cycle rapidly from charge to discharge over many years, without any loss of performance, unlike many other energy storage technologies.

To put it in context, you have to drop 500 tons around 800 metres to generate 1 MWh. “This led Gravitricity inescapably in one direction − underground,” says commercial director, Robin Lane. “By deploying our systems in existing mine shafts, we are able to use weights significantly heavier than anything which could be cost-effectively supported by aboveground structures; and we can drop those weights over longer distances. We are evaluating mine shafts 1000 metres deep, allowing a much greater drop than anything which could realistically be achieved above ground.

“In the future, we plan to build multi-weight systems raising and lowering weights totalling up to 12 000 tonnes in shafts up to 750 metres deep, offering almost 25 MWh of flexible storage. A world of distributed energy generation will require distributed energy storage, so Gravitricity plans to develop systems which can be located at scale anywhere – alongside renewable generation, at the transmission level, in off-grid locations, or in urban centres.”

Gravitricity has successfully trialled its first gravity battery prototype, a 15 metre steel tower suspending a 50 ton iron weight. Electric motors slowly hoist the massive metal box skyward before gradually releasing it back to earth, powering a series of electric generators with the downward drag. The company’s focus is now below ground. Engineers have been scoping out decommissioned coal mines in Britain, Eastern Europe, South Africa and Chile.

Gravitricity is working with Dutch winch and offshore manufacturer, Huisman Equipment to develop a prototype system, and with Czech company, Nano Energies to establish commercial routes to market for GES. To this end, it has signed a memorandum of understanding with Czech State-owned mining enterprise Diamo to transform the former Darkov deep-level coal mine in the country into a 4 MW energy storage facility by lowering and raising a single massive weight suspended in the mine shaft.

Lane says there is vast potential for GES in South Africa to use decommissioned mine shafts beyond their useful lives, instead of having to break down infrastructure and rehabilitate the area. Of particular interest to Gravitricity are the country’s deep level mines.

Public relations manager, Simon Farnan tells SA Instrumentation & Control that the company identified over 30 deep shafts suitable for early projects, and signed MoUs with South African companies UMS Mining Group and RESA. “We are still considering development opportunities in South Africa, and are actively pursuing innovation grants that would help support further research opportunities with our study partners,” he says.

However, before Gravitricity can partner with mining companies in South Africa, it has to validate the capabilities and performance metrics of its technology through the scaled-up system in the Czech Republic, which should be operating in 2024.

“At this stage, our focus is on developing our first commercial projects in the Czech Republic, Germany and the UK,” he explains.

It seems like a neat solution. There are disused mine shafts all over the world deep enough to house a full-sized Gravitricity installation stretching down 300 metres and more. Blair says that there’s the political will to make it happen too, with policymakers keen to tap into public enthusiasm for a just transition.

It’s impossible to know how many of these will come to fruition; but gravity batteries, by harnessing an infinite, omnipresent force, almost certainly have a role to play.




Share this article:
Share via emailShare via LinkedInPrint this page

Further reading:

The journey towards renewable energy in the Seychelles
Electrical Power & Protection
The Seychelles is committed to its ambitious goal of achieving net-zero carbon emissions by 2050. Recent technological advancements and strategic planning are steadily paving the way for a more sustainable future.

Read more...
High performance power distribution
Electrical Power & Protection
Hexagon Electrical plays an important role in enhancing efficiency and safety through the supply and support of a wide range of critical equipment for hazardous industrial and mining sectors in Africa.

Read more...
Navigating solar energy adoption
Electrical Power & Protection
Although South Africa’s enhanced solar tax rebate has ended, solar and energy storage solutions remain accessible and achievable. By taking a proactive and strategic approach, businesses can successfully lower their operational costs, mitigate power outages, and secure long-term energy independence.

Read more...
As wind energy gains momentum, lack of grid infrastructure remains a bottleneck
Electrical Power & Protection
Interest in wind energy has gained significant momentum in South Africa, opening up new opportunities for investment. However, lack of grid infrastructure could prove to be a stumbling block in unlocking this potential.

Read more...
Portable appliance tester
Vepac Electronics Electrical Power & Protection
The new appliance tester from Vepac is the ideal tool for testing the safety of electrical appliances in accordance with DGUV regulation 3 and BetrSichV. It enables the precise measurement of protective conductor or touch current using the equivalent leakage current method.

Read more...
Is sustainability enough any more?
Electrical Power & Protection
With the planet’s resources stretched to the brink and no signs of improvement, it is time we look beyond sustainability and explore regenerative thinking and design.

Read more...
A simple guide to understanding the importance of IP ratings
Electrical Power & Protection
When selecting electrical products for industrial, commercial or even domestic use, it is crucial to consider how well they can withstand environmental factors like dust and water. This is where ingress protection (IP) ratings come into play.

Read more...
A milestone in electrical safety
ABB South Africa Electrical Power & Protection
Celebrating a milestone in electrical safety, ABB proudly marks the 100-year anniversary of its revolutionary Miniature Circuit Breaker.

Read more...
The power of water
Editor's Choice Electrical Power & Protection
The Alpenglow Hy4 is the world’s first water-based hydrogen combustion engine, offering a convincing alternative to traditional battery-electric vehicles and established hydrogen fuel cell designs.

Read more...
Optimising purification for green hydrogen production
Parker Hannifin - Sales Company South Africa Editor's Choice Electrical Power & Protection
Parker Hannifin delivers advanced purification and thermal management components that enhance green hydrogen production.

Read more...









While every effort has been made to ensure the accuracy of the information contained herein, the publisher and its agents cannot be held responsible for any errors contained, or any loss incurred as a result. Articles published do not necessarily reflect the views of the publishers. The editor reserves the right to alter or cut copy. Articles submitted are deemed to have been cleared for publication. Advertisements and company contact details are published as provided by the advertiser. Technews Publishing (Pty) Ltd cannot be held responsible for the accuracy or veracity of supplied material.




© Technews Publishing (Pty) Ltd | All Rights Reserved